Imaging system controls baking process on production line

Georgia Tech Research Institute pairs an imaging system with advanced controls in the production of sandwich buns, instantaneous changes during the process can help ensure maximum efficiency, output.

03/11/2011


The Georgia Georgia Tech Research Institute - Imaging System ControlsTech Research Institute (GTRI) may possess the secret to baking perfect buns every time. Its researchers have developed a production-line system that automatically inspects the quality of sandwich buns exiting the oven and adjusts oven temperatures if it detects unacceptable buns.

“We have closed the loop between the quality inspection of buns and the oven controls to meet the specifications required by food service and fast food customers,” said GTRI senior research engineer Douglas Britton. “By creating a more accurate, uniform and faster assessment process, we are able to minimize waste and lost product.”

During existing inspection processes, workers remove a sample of buns each hour to inspect their color. Based on this assessment, they manually adjust the oven temperature if the buns appear too light or too dark. But with more than 1,000 buns leaving a bakery production line every minute, there is a great need for automated control to make more rapid corrections to produce buns of consistent color, size, shape and seed coverage.

“Automated control over the baking process is necessary to produce a consistent product through batch changes, shift changes, daily and seasonal temperature and humidity changes, and variations in ingredients,” added Britton.

Working with baking company Flowers Foods, headquartered in Thomasville, Ga., and Baking Technology Systems (BakeTech), a baking equipment manufacturer in Tucker, Ga., Britton and GTRI research scientist Colin Usher have tested their industrial-quality prototype system. Made of stainless steel, the system is dust and water resistant, and mounts to existing conveyor belts as wide as 50 inches.

The prototype system has been shown at the International Baking Industry Exposition held in Las Vegas. Initial funding for this project was provided by Georgia’s Traditional Industries Program for Food Processing, which is managed through the Food Processing Advisory Council (FoodPAC).

Georgia Tech Research Institute - Imaging System ControlsBritton and Usher tested the system in a Flowers Foods bakery for a year, running it regularly for hour-long intervals. During this testing phase, the system successfully inspected a variety of buns, including seeded buns, unseeded buns, different size buns and different top-bun shapes. For the past year, the system has been in full-operational mode in the bakery.

“Without the imaging system, it would be impossible for an operator to respond quickly enough to make the correct changes to the oven to improve the target color of the product,” said Stephen Smith, BakeTech’s vice president and director of engineering.

As fresh-baked buns move along Flowers’ production line, a digital camera captures an image of them. Items not measuring up in terms of color are identified by imaging software and the color information is automatically sent to the oven controllers, which adjust the oven temperature to correct the issue.

“Our system reduces the time between noticing a problem and fixing it,” Usher explained. “The window for correction is short, though, because an entire batch may only take 12 minutes to bake and the buns stay in the oven for eight minutes, providing a four-minute window to correct the temperature of the batch once the first buns come out so that the rest of the buns in the batch are an acceptable color when they come out of the oven.”

The system also automatically records data including shape, seed distribution, size and contamination to generate production reports that are immediately available for statistical process control. Another feature of the system is that the conveyor belt can be any color except the color of the buns. This allows the system to image buns on almost any conveyor belt surface or in pans.

In the future, the imaging system could be adapted to control the quality of other bakery products, such as biscuits, cookies, crackers, bread and pies.

www.gtri.gatech.edu

Georgia Tech Research Institute (GTRI)



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me