Illumination

04/28/2003


Bright light stand

Port-A-Lite 1250W2 is a metal halide light stand that provides portable, high-intensity lighting. The efficient, super-high output (SHO) lamp fixture is 25% brighter than the model it replaces. The parallel design holds the lamp in the optimum horizontal burning position. The insulated lamp tip supports isolate the lamp from damaging vibration. The single-fixture light stand features a smooth, rounded two-wheel base and telescoping tower that extends to 10 ft. Allmand Bros., Inc. allmand.com Write 325 on PE card

Fluorescent fixture

T-Bay fluorescent fixture, which contains the mounting flexibility of high bays and includes T5 or T8 linear fluorescent lamps, is designed to replace conventional HID lighting in industrial applications. The fixture accepts multiple suspension methods, including 3/4-in threaded pipe for direct replacement of existing high- bay fixtures. Its ends and reflector panels are hinged for easy mounting, wiring, and quick access to the ballast chamber. A 4-lamp 54 W HO T5 fixture requires 239 W as compared to 454 W for metal halide with the same lumen output. Crescent/Stonco stoncolighting.com Write 326 on PE card

Ballast for fluorescent lamps

Centium ICN-2S28 is an electronic ballast that is designed to operate up to two 35, 28, 21, or 14-W T5 fluorescent lamps. The ballast allows 120-277 Vac operation at 50 or 60 Hz. It features a low-profile, 1-in.-high enclosure. Color-coded poke-in connectors minimize installation time while helping ensure wiring accuracy. It also features rapid start lamp ignition, high power factor (>0.98), and a total harmonic distortion (THD) specification of less than 10%. Advance Transformer Co. advancetransformer.com Write 327 on PE card

Hazardous area incandescent lighting

Series 381 and 383 lines of explosion-proof and vapor-proof incandescent lighting fixtures for hazardous and nonhazardous areas include models designed for ceiling, pendant, box, and stanchion mounting. Both designs share design features that enhance reliability and prolong operating life. All fixtures are constructed of cast aluminum and equipped with heat and impact-resistant prismatic glass globe protected by a die-cast guard. lpdi-inc.com LDPI, Inc. Write 328 on PE card

Ballast fliers

Triad High Efficiency, and AccuStart ballasts are highlighted in three new product fliers, which provide specifications, catalog numbers, wiring diagrams, and appropriate lamp applications. High Efficiency ballast families feature energy savings; Accustart electronic ballasts feature programmed rapid start for short-cycle applications. Universal Lighting Technologies, Inc. universalballast.com Write 329 on PE card

Lighting fixture brochure

Illuminaire, The New Shape of Light is the title of a color brochure that details a new line of prismatic glass lighting fixtures for light industrial applications. The fixtures are available in five styles: Egg, Crest, Tri-Egg, Tri-Crest, and Quad. The illustrated brochure details fixture advantages, finishes, lamp choices, mounting heights, and options. Holophane holophane.com Write 330 on PE card





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me