ICC and ASHE to develop building code changes for medical facilities

The collaborative effort aims to review and update the current code to ease confusion from overlapping codes and improve safety while maintaining cost effectiveness.

03/02/2011


The International Code Council (ICC) and the American Society for Healthcare Engineering (ASHE) of the American Hospital Association (AHA) are collaborating to develop a series of building code changes that will result in safe, effective, and efficient provisions for hospital and ambulatory care facilities.

“Including stakeholders in a consensus-driven approach within the Code Council’s public and transparent code development process is a formula for success and safety,” ICC CEO Richard P. Weiland said. “Together we can create broad-based, model codes that consider affordability and meet the needs of hospitals and other health care facilities without sacrificing safety.”

The joint effort, according to both organizations, aims to:

 

 

  • reduce conflicts caused by overlapping local and federal building and fire code requirements that can arise when constructing medical facilities;
  • ease the confusion between multiple authorities responsible for code enforcement of health care structures;
  • create comprehensive building and fire codes for the design and construction of new hospitals and ambulatory care facilities;
  • consistent code evaluation of existing health facilities; 
  • increase the opportunity to apply science, research, modeling and historical data in the code development process; and
  • consider cost-effective construction alternatives which do not reduce current levels of safety. 

“Our members dedicate countless financial and human resources to assure fire and building codes and standards are continuously met in our facilities,” ASHE Deputy Director, Douglas S. Erickson said. “There comes a time, however, when the value of continuously increasing fire and building code requirements has a diminishing return on investment, and that time is now.” 

As part of its commitment to this collaboration, the ICC Board has approved the creation of a 15-person Ad Hoc Committee on Health Care to review and update provisions in the International Codes that impact the construction of new and existing hospitals and ambulatory care facilities. The objective of the committee is to develop code change proposals to the International Codes that will result in the most contemporary, effective, efficient and cost-effective provisions for health care facilities to assure the highest level of safety for patients, employees and other users.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me