Hydrogenics completes fuel cell powered forklift pilot

11/03/2005


Hydrogenics Corp. announced the successful completion of forklift field trials at GM of Canada's car assembly plant in Oshawa and FedEx Canada's “mission critical” logistics hub at Toronto International Airport.

Hydrogenics designed, built and integrated fuel cell hybrid power packs to replace the lead-acid batteries in two Class 1 Hyster 5,500-pound sit-rider forklifts provided by NACCO Materials Handling Group. The forklifts were placed into service at two indoor multi-shift operations to showcase the technical readiness of Hydrogenics' fuel cell hybrid power pack and to verify the benefits and value propositions that can be offered to this market. In addition, Hydrogenics designed and built an indoor, PEM electrolyzer hydrogen refueler that was used to refuel the forklifts during the deployments.

"We gained real-world learning's for this near term application as our forklifts operated full-time for three months in rigorous operations, with virtually no maintenance downtime. Just as important, they finished the trials at the same high level of performance as they began," said Pierre Rivard, President and CEO, Hydrogenics. "By undertaking a project that demonstrated Hydrogenics' uniqueness in being able to deploy world-class technologies and products in both fuel cells and hydrogen refueling, we have shown the kind of “end-to-end” solution Hydrogenics can offer to OEMs and future users of this emerging technology."

Multi-shift indoor material handling operations face many challenges as a result of using forklifts that rely on lead-acid batteries. Battery management issues profoundly impact operations, including a marked decrease in forklift power prior to shift-end, loss of productivity due to battery change-out time and significant dedicated space and staffing for battery management. In addition, 24-hour operations require as many as three batteries per vehicle to cover the full shift rotation, contributing to ongoing capital cost infusions and battery disposal problems.

The field trials successfully addressed all of these battery limitations. Not only were the forklifts operating at full power at the beginning and end of each shift, they were also refueled by the forklift operators, as needed, in two minutes or less from Hydrogenics' indoor refueling station.

"Hydrogenics is now able to go to forklift manufacturers and customers and demonstrate that we have a materials handling solution that will start paying for itself over the total life of forklift ownership, through operational efficiencies, productivity increases and fast, reliable refueling,” Rivard said. “We know that materials handling operations are starting to understand and quantify the value that a 'fuel cell solution' offers today, boding well for the future as costs continue to come down. We see this emerging business as a substantial growth area for Hydrogenics over the next three years."

The multi-billion dollar annual forklift market is positioned as an early adopter of fuel cell technology. Initial adoption is anticipated in multi-shift indoor operations that deploy a fleet of material handling vehicles. This particular market, currently dominated by battery-powered electric platforms, is where Hydrogenics' fuel cell hybrid power pack can offer a viable 'plug and play' alternative. More than 300,000 new battery-powered material handling vehicles are purchased globally every year.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me