Hydraulics

For many plant managers, achieving hydraulic system efficiency is an enigma. Growing sophistication in system components and increasing complexity of maintenance strategies have left them puzzled. During this time of technological and procedural innovation, it is imperative to acknowledge that the basic hydraulic systems principles haven't changed.

12/01/2006


For many plant managers, achieving hydraulic system efficiency is an enigma. Growing sophistication in system components and increasing complexity of maintenance strategies have left them puzzled. During this time of technological and procedural innovation, it is imperative to acknowledge that the basic hydraulic systems principles haven't changed.

Maintenance professionals can achieve hydraulic system efficiency by focusing on the fundamentals. Concentrating on contamination control, system cleanliness and equipment wear protection enables companies to improve hydraulic system life and streamline production while simplifying maintenance.

Contamination includes air, water, dirt and other particulates. Air is detrimental to the life of the hydraulic system. It inhibits a fluid's ability to protect moving components, causing parts to wear quickly, foam to develop, operating temperatures to increase, premature pump failures and erratic actuator performance. The two most common air-related hydraulic contamination conditions are aeration and cavitiation.

Aeration occurs in the preliminary stages of a hydraulic system. When the pump sucks the oil from the reservoir, the created vacuum moves the oil through the pump and into the hydraulic pipeline. If the oil level is low or pipe fittings are loose, air enters the pump and aeration occurs. A noisy pump, a spongy pressure gauge or oil foaming are telltale signs of aeration.

Ensure the reservoir is filled to the proper fluid level. Test inlet connections by covering them with shaving cream. If bubbles implode toward the union, repair the problem and bleed the air from the system.

Mineral oil and synthetic-based fluids contain about 8% of dissolved air. When this air is freed from the oil, cavitation occurs. Common causes of cavitation include the vacuum draw on the oil exceeding 4.5 mm Hg; a clogged or collapsed inlet strainer; or inlet piping with a diameter that is too small. These factors can lead to foam formation, premature pump failures, accelerated component wear, increased operating temperatures and unscheduled maintenance. To prevent cavitation, maintain optimal hydraulic fluid levels in the reservoir, and monitor hydraulic pressure so it remains within the acceptable range.

A key indicator of a hydraulic fluid's antiwear performance is the ability of hydraulic oil to retain it properties over the long haul. Typically, three to five years is an acceptable lifespan of hydraulic fluid. Higher-performing fluids can last up to seven years.

Performance characteristics are best achieved when the oil is clean. Typical hydraulic systems require oil cleanliness in the ISO 16/13 or 14/11 range. To ensure cleanliness, maintenance professionals should install a filter before the pump, after the pump, a separate servo valve filter and/or a return-line filter. The strainer protects the pump; the pressure filter protects the actuator; the servo filter ensures proper servo operation; and the return-line filter ensures the reservoir stays clean.


Author Information

Rick Russo is a senior lubrication engineer for ExxonMobil Lubricants & Specialties, based in Plano, TX. He has more than 18 years of experience, working in various engineering and technical roles for ExxonMobil.




No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me