HP's newest data center opens with a unique cooling set up
In northeast England, HP's Wynyard Center opened this week with a unique cooling set up and an innovative design.
According to DatacenterDynamics , the HP Wynyard data center opened this week in northeast England. Contrary to the reports, the data center site will not be cooled by the wind. What will be cooled is filtered outside air.
What separates it from other mega scale data center sis the sign, which will see large volumes of slow moving air sucked in using 6.88-ft variable speed axial fans that service each data halls-there are four data halls currently available; one is live, one is being commissioned, and remaining two will take load later this year.
The eight inlet fans per data hall move the air through bag filters to a 16.4-ft sub-floor pressurized plenum. The air is then forced upwards through cold aisle contained cubes before passing through servers, being drawn out through the ceiling, and then re-circulated.
Eight exhaust fans draw the air out and pass it back over the data halls where it is mixed with outside air or where it can be fully re-circulated. Chiller capacity is available to augment the cooling when necessary and the chillers are also operated 200 hours/year to provide humidification.
To view the data center's floor plan, system configurations, and other diagrams, visit the DatacenterDynamics website here .
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.