How PSM-NEP applies to non-chemical plants

Process safety management, specifically the National Emphasis Program (PSM-NEP) might be terms and acronyms that don’t make any sense unless you are in a facility that works with or around highly hazardous chemicals.


Process Safety Management, specifically the National Emphasis Program (PSM-NEP) might be terms and acronyms that don’t make any sense unless you are in a facility that works with or around highly hazardous chemicals (HHCs). It would be a very big mistake to think that this OSHA initiative doesn’t apply to you. Many of the activities that maintenance and engineering perform each day are applicable to PSM and Non-PSM plants. The only real difference would be in the level and degree of documentation required. Although it wouldn’t be a bad practice to document your activities as if you were under the watchful eyes of OSHA through a PSM program.

There is a significant chance that although your facility is not PSM mandated, you do follow some national or international quality initiative such as ISO or several of the other professional doctrines. All of which require extensive and ‘auditable’ documentation.

There is little doubt that many maintenance organizations are very good at ‘doing’ and not so good at ‘documenting’. Unfortunately, if it isn’t documented, in many cases, it didn’t happen.

OSHA even made it part of the official record in one of their Instructions that “employers may have an extensive written process safety management program, but insufficient program implementation.” In other words, we don’t do what we say we do. This probably doesn’t just happen with PSM processes.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.