Honeywell demo shows how process industries 'can do work wirelessly’

At its recent Honeywell User Group (HUG) meeting, the company set out to prove that an entire process unit could be built with no wired devices, except for power in some cases. While the process in this case was nothing more than pumping water from one tank to another, it did involve an impressive number of devices, including a pump, control valve with indicator, radar level gage, pressure sens...

07/01/2009


At its recent Honeywell User Group (HUG) meeting, the company set out to prove that an entire process unit could be built with no wired devices, except for power in some cases. While the process in this case was nothing more than pumping water from one tank to another, it did involve an impressive number of devices, including a pump, control valve with indicator, radar level gage, pressure sensors, temperature sensor, equipment health monitor for the motor, and a few others. They were not all input devices either; several were actuators that required bidirectional communication.

All of this was tied to the controller via a single wireless network with no data cabling to the control system at all. Even the HMI was wireless, including a second walk-around control device via a tablet PC. A few devices had external power, such as the pump and radar level gage, but that was it. While wireless instrumentation has been the area that has generated the most discussion--and often controversy--the idea of doing all communication over the air, regardless of whether it’s input or output, has been slower in coming.

Andrew Nolan, network and wireless consultant for Honeywell, was responsible for designing the display. He explains, “We weren’t trying to show a real process as much as showing that we can do work wirelessly, with input, output, monitoring, HMI, controller, and all those different pieces. The tanks were there to provide a platform for all the different applications that we had.”

While the demonstration was all one system, more than one wireless protocol was in use according to appropriate bandwidth requirements. This concept of using the right tool for the job has been part of the OneWireless system from its launch. The instrumentation and discrete outputs use the ISA-100 ready system that Honeywell is adopting for its devices. The HMI and walk-around control use wireless Ethernet.

Honeywell is not the only company that could build such a demonstration, but it’s likely no other could have done it with so much of its own equipment. Other vendors are concentrating more on one segment of the system, but they will likely broaden their offerings as demand grows.

“It’s interesting to follow the evolution of industrial wireless,” Nolan adds. “When it first came out, it was strictly monitoring or SCADA-type applications. Back then if you asked about wireless control, you got 'No way. We’ll never do that sort of thing.’ By now, all doubt that we will do wireless control is gone—it’s just a question of when.

“We’ve certainly shown that for the types of processes that can stand one-second latency, wireless is not only feasible, but with our new R120 release with the redundant gateway, we can do it with no single point of failure. With that kind of reliability and one-second reporting, it’s very appropriate to talk about wireless control.”

www.honeywell.com/ps





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me