Hannover Messe: Festo robotics, valves, motion control, software

Festo debuted products, presented growth at the 2011 Hannover Fair, including robotics pneumatic valves, motion control, and software to help automation design.

04/19/2011


Festo debut a wide range of products and presented their growth at the 2011 Hannover Fair, earlier this month. Here are some Festo's 2011 highlights (PDF):

Finding inspiration in nature

What do the herring gull and the elephant's trunk have to do with automation technology? Festo looked towards nature to answer some long-standing questions but also to influence their automation technology design. With SmartBird, engineers from Festo have decoded the flight of birds, thus accomplishing a further breakthrough in automation technology. Just as with the Bionic Handling Assistant – which in 2010 received the German Future Prize, the highest award in the field of technology – and with the learning system Robotino XT and the Bionic Tripod 3.0, Festo is focusing this year on energy efficiency and lightweight construction. Festo is providing fresh impulse not only in factory automation, but also in process automation: OptoFluidic paves the way for efficient analysis and diagnostic processes that allow continuous non-destructive analysis of fluids.

Mastering the fundamentals of electrical engineering

Industrial mechanics, electricians and mechatronics experts all share one aspect of vocational training: they must master the fundamentals of electrical engineering. At the 2011 Hanover Trade Fair, Festo Didactic presented the latest educational trends and learning systems such as the TP 1011 electrical engineering training unit, the recipient of the iF Product Design Award 2011. These systems provide opportunities for efficient industry-oriented training at companies and universities. Simulation games such as the Synchro Game from the Training and Consulting sector expressed how processes in production or administration can be improved, thus bringing about savings in terms of costs, time and energy. Targeted seminars on the topic of Energy Saving sensitized the market in terms of cost and energy efficiency.

Products of Note

  • The Profisafe module for the CPX terminal, the valve terminals VTSA and VTSA-F with control block VOFA for reversing the cylinder movement and protection against unexpected start-up as well as ready-to-install safety system solutions are just some of Festo’s safety highlights.
  • The electric toothed belt axis ELGG features two slides synchronized by a single toothed belt and powered by a single motor. The axis can generally be used for movements in opposite directions.
  • The pneumatic proportional media valve VZQA from Festo offers advantages over flap valves or ball valves: free product flow, low weight and low energy consumption. It also meters flow rates quickly and very precisely in conjunction with proportional pressure regulators VPPM and the modular electrical terminal CPX.
  • FluidDraw Professional software enables planners and developers to draw integrated circuit plans quickly and cost-effectively. The intelligent software solution permits user-friendly creation of clear structures, even with complex systems, and now also supports electrical circuit diagrams.

Global growth

Strong market standing in Europe and Germany – coupled with its international alignment with the boom regions of Asia and America – helped Festo AG post record sales in its fiscal year 2010. Global sales climbed 37% to $2.56 billion (prior year: $1.85 billion). In Europe – traditionally Festo’s largest market – the company raised sales by 31%. Asia grew by 75%, North and South America by 45%. On the domestic German market, sales began modestly but then climbed rapidly to 33% for the year as a whole. In Festo’s new business fields, Process Automation posted sales growth of 25% while Electric Drives enjoyed growth in excess of 90%.

In addition to its European activities, Festo has also been realigning its overseas business since 2010 in order to fully exploit growth opportunities in newly allocated global markets. As a family-owned company, Festo aims to strengthen its financial independence and align its global supply chain in such a way that it can react even more swiftly and flexibly in future to highly volatile international markets. The Electric Drives and Process Automation divisions are to be expanded further, together with industry-relevant training and consulting, in order to provide a full range of products and services as well as one-stop-shopping solutions from Factory to Process Automation. Global headcount rose to 14,600 in 2010 (prior year: 13,500), of which 6,800 people (prior year: 6,600) were employed in Germany and 7,800 (prior year: 6,900) abroad. The company invested strongly in education and training for its employees in 2010, as well as in future-oriented technologies. Spending on new product development in Germany amounted to 9.5% of sales. At Hanover 2011, presented 66 new products and numerous solutions for safe, intelligent and energy-efficient green production under the heading “Focus on Efficiency” – from Mechatronic Motion Solutions to Bionics. For its fiscal year 2011, the Management Board expects slower macroeconomic growth, but a double-digit increase in Festo’s global sales of well over 10%.

www.festo.com

Festo

- Compiled and edited by Gust Gianos, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
The true cost of lubrication: Three keys to consider when evaluating oils; Plant Engineering Lubrication Guide; 11 ways to protect bearing assets; Is lubrication part of your KPIs?
Contract maintenance: 5 ways to keep things humming while keeping an eye on costs; Pneumatic systems; Energy monitoring; The sixth 'S' is safety
Transport your data: Supply chain information critical to operational excellence; High-voltage faults; Portable cooling; Safety automation isn't automatic
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Synchronizing industrial Ethernet networks; Selecting protocol conversion gateways; Integrating HMIs with PLCs and PACs
Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.