Growth, hiring on the rise in valve industry

VMA reports positive trends at its 75th anniversary meeting


The valve industry employs 50% more people than a decade ago, provides great jobs and is expecting to add many more this year, reported the Valve Manufacturers Association (VMA) during a briefing at its 75th anniversary Annual Meeting in Palm Beach, Fla.

During the meeting, VMA unveiled the Employment Snapshot Report, new member research that provided insight about industry employment and discussed new trends affecting the economic outlook of the valve industry. 

“Valve manufacturers are the backbone for many other industries and a bellwether for the economy. It’s great news that so many of our members are increasing their workforces. That means other industries are working too,” said VMA chairman Mark Cordell, president of Distributed Valves for Cameron Valves & Measurement.

More than half of responding member companies reported their domestic hiring was growing up to 5% this year. Nearly one-fifth expected growth up to 10% and another fifth is planning to grow their ranks up to 16%. Only 3% of valve manufacturers did not expect any growth.

These workforce figures are consistent with the increase in shipments that members anticipated, as reported in VMA’s annual market forecast released earlier this year. The forecast report predicted that shipments for the U.S. industrial valve industry would grow 3% in 2013, increasing to nearly $4.3 billion. The increase would mark the fourth consecutive year of growth following the recession, exceeding the industry’s previous 10-year peak in 2008.

Through the Employment Snapshot survey, VMA estimates that the domestic valve industry (including Canada) employs more than 30,000 people, a 50% increase from a decade ago. Overall, the industry has a seasoned workforce, with employees averaging 13 years of experience and that are 43.3 years old. In addition, 26% of their employees have college degrees, and 33% are considered exempt employees.

Also, a majority of these firms—two-thirds of which are privately held—have international locations and employees and most have plans to grow their international workforce over the next five years. In fact, 30% of these firms expect more than 10% growth in their international workforce over this time period. China was the most frequently cited location of internationally-based employees, followed by the United Kingdom and Germany.

“We are growing and hiring, but the industry is also graying so keeping up with our talent needs will become more and more important for our members. In particular, many members continue to express concern about being able to attract enough young qualified workers and skilled labor such as welders and machinists,” said VMA president William Sandler.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me