Graphical System Design for Machine Control by National Instruments

The traditional process for designing embedded machine control systems typically involves multiple stages of development that each requires specialized electronic design automation (EDA) tools such as state-diagram and flowcharting tools, SPICE circuit simulation, board layout and routing, control design tools, finite element analysis (FEA), C and VHDL languages, multiple target-specific compilers, and human-machine interface (HMI) tools.

05/19/2008


The traditional process for designing embedded machine control systems typically involves multiple stages of development that each requires specialized electronic design automation (EDA) tools such as state-diagram and flowcharting tools, SPICE circuit simulation, board layout and routing, control design tools, finite element analysis (FEA), C and VHDL languages, multiple target-specific compilers, and human-machine interface (HMI) tools. New highly automated graphical system design (GSD) tools and PAC hardware systems can help you streamline the machine control development process.These new GSD tools offer complete customization of reconfigurable FPGAs, real-time processors, and industrial I/O modules using the National Instruments LabVIEW graphical programming language. With NI LabVIEW tools, you have open access to low-level resources while taking advantage of easy embedded programming and hundreds of built-in functions for automating common machine control tasks. PAC hardware systems, such as the low-cost CompactRIO embedded system, are designed for seamless integration with the LabVIEW GSD tool chain. With PACs, you can build advanced systems incorporating software capabilities such as advanced control, communication, data logging, and signal processing with a rugged controller performing logic, motion, process control, and vision.

National Instruments (16 page pdf)





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me