Going beyond the code

The New York Times Building is a 52-story tower with 1.5 million gross sq ft and is a mix of both office and retail uses with open spaces and floor-to-ceiling glass walls.


Interior of the New York Times Building. Courtesy: Nic LehouxIt is important to note that the ASHRAE Standard 90.1 lists bare minimum requirements. Good design recommendations can go far above and beyond what is required. Such is the case with the New York Times Building, a 52-story tower with 1.5 million gross sq ft. The building is a mix of both office and retail uses with open spaces and floor-to-ceiling glass walls.

“We designed our building to use 1.28 W/sq-ft of lighting power. With [lighting controls], it’s only using 0.396 — that’s about 70% less,” said Glenn Hughes, director of construction for The New York Times Co.

Interior of the New York Times Building. Courtesy: Nic LehouxThe lighting controls use a number of different strategies to maximize occupant comfort and to provide flexibility and adaptability to the business owners. Strategies include daylight control, occupant control, target set point control (light level tuning), time clock control, and emergency lighting control. The centralized lighting controls equipment also has software to control, monitor, and report on the lighting usage in the building.

The daylight sensors maximize natural light pouring into a space by continually and imperceptibly adjusting the electric light levels to maintain a consistent overall light level as set for the people working in each space.

The lighting scheme for each floor is divided into zones, each with its own lighting levels that fit the needs of the employees (depending on what type of work they perform) and based on the amount of daylight that penetrates that space. More than 15,000 digitally addressable ballasts were used to achieve that kind of precision, said Hughes.

This shows New York Times building lighting energy savings. Courtesy: Lutron

In addition to these savings, there is a derivative effect on the HVAC system energy performance. The dramatically reduced output levels of the lighting system means that less heat load is created by the lights, which means the air conditioning system works less, further reducing energy use in the building.

The story does not end by looking at energy savings alone. According to Hughes, lighting controls dramatically improved the lighting environment inside The New York Times Building. Employee comfort, increased productivity, flexibility of use, and reduced energy usage were all achieved by the lighting control system inside The New York Times Building.

Schultz is an electrical engineer with Metro CD Engineering and serves as education chairman for his local Illuminating Engineering Society section (IES). He is a 2011 Consulting-Specifying Engineer 40 Under 40 winner. Chow is the founder and owner of Metro CD Engineering. He is a 2009 Consulting-Specifying Engineer 40 Under 40 winner.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me