Global mobile PC market underperforms in Q4 despite growth

Despite 9% growth, the global market for mobile PCs came in below expectations in the final quarter of 2013, according to a new report from IHS Technology

02/18/2014


Shipments of mobile PCs worldwide in the fourth quarter last year amounted to 52.6 million units, up 9.4 percent from 48.1 million in the third quarter. However, the fourth quarter result was far less than the 55.3 CE140219_Globla-Mobile-PC_Image courtesy of IHS
million units that the industry had been hoping for. And if market performance every quarter was measured against the equivalent three-month span from a year earlier, it was the sixth straight year-over-year decline on a quarterly basis for the period, down 5 percent from the fourth quarter of 2012, as shown in the attached figure.

“Things were looking positive for the fourth quarter of 2013 after the third had come in on target. The introduction of new platforms and the arrival of Intel’s new-generation Atom processor Bay Trail were expected to enable a new entry-level pricing point for the PC market not seen since the netbook,” said Craig Stice, director for compute, servers and storage at IHS.

“But with the consumer PC market struggling, PC vendors proceeded to maintain a conservative buying plan for the holiday season with attempts to keep inventory levels lean. As a result, entry-level PCs did not make it into high volume for the holidays, and overall shipments underperformed the initial heady outlook,” Stice added.

And yet the disappointment was tendered with an upshot of cheer: The 9.4 percent increase in the fourth quarter was the strongest sequential growth since the fourth quarter of 2009. It was also the second straight sequential rise after the 5 percent contraction in the second quarter.

These findings are contained in the report, “Mobile PC Remains Soft in Q4,” from the Information Technology service of IHS.

Struggles continue, but hopes percolate

The mobile PC market, which counts laptops and PC tablets, has been laboring for some time now to defy the mighty heft of the wireless market. Wireless PC rivals like smartphones and tablets have been pronounced by consumers to be more agile and appealing, with their PC-like functions made available in an abbreviated form factor.

And while the mobile PC industry has countered with innovations of its own, the industry as a whole has not been able to lure consumers away from the hugely popular handsets and tablets.

Even so, some signs are giving the industry renewed cause for optimism. For instance, PC vendors are expected to continue replenishing their inventory with new machines featuring Bay Trail, which will provide longer battery times and more powerful graphics performance. Sales could also be up around this time as Asia celebrates the Chinese New Year, another encouraging factor.

A third driver could be the scheduled expiration of the Windows XP operating system in April this year. Consumers could then undertake a refresh of their current machines, ditching old laptops in favor of new Windows 8-equipped mobile PCs to go with upgraded hardware.

Finally, mobile PC enthusiasts believe that media tablets like the Apple iPad are reaching saturation levels especially in the developed markets, which could stoke new interest among those wishing to go back to tapping the full power of a PC, even if it’s just a mobile version like a laptop.

For these reasons the decline seen in the last two years should start to level off, Stice noted, even though the PC space isn’t likely to bounce back to the double-digit growth once seen in years past.

Lenovo buys IBM server business

Within the server industry, the move by China’s Lenovo to acquire IBM’s server business will boost Lenovo to the No. 3 spot in servers, just behind Hewlett-Packard and Dell.

However, the $2.3 billion purchase comes at a time of increasing uncertainty for servers in general, especially as businesses turn increasingly to customized data centers and cloud storage, IHS believes. This was unlike 2005 when Lenovo bought IBM’s PC business when the PC industry was clearly still on the rise. Lenovo’s advantage in the market this time, however, will lie in its ties to China, where HP and Dell have struggled to gain traction in their server operations.

For IBM, the sale will allow the New York-based giant to shed its lowest-profit segment and continue focusing on its enormously lucrative services and software business—to say nothing of adding to the company’s ultimate bottom line.

-Edited by CFE Media



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me