Gigabit high-power injector for Power over Ethernet

The INJ-24A Gigabit High Power PoE+ Injector from Moxa transmits 60 watts of power to any PD or PoE device and can easily adapt to different power standards with a DIP switch.

05/09/2013


The INJ-24A Gigabit High Power PoE+ Injector transmits 60 watts of power to any PD or PoE device and can easily adapt to different power standards with a DIP switch. Courtesy: MoxaMoxa's INJ-24A Gigabit High-Power PoE+ Injector transmits data and up to 60 watts of power to any PD or Power over Ethernet device, allowing devices on 10/100/1000 networks to safely operate with twice the power of conventional PoE+. (PoE is Power over Ethernet.)

The INJ-24A can quickly adapt to different power standards. By adjusting a DIP switch, the operator can select different power standard modes and even which wire pairs to deliver power on. This allows the INJ-24A to supply power to nearly any PoE device with minimal compatibility obstacles because it can be quickly reconfigured to match the device's settings.

The INJ-24A is designed to transmit data even with potential hazards like power fluctuations, static electricity, and other sources of electromagnetic interference. Media connections are reinforced with protection against power surges of up to 3 kV, while a heat-efficient housing enables the INJ-24A to operate in extremely cold or hot weather (-40 C to 75 C). The built-in 24/48 V dc booster enables the injector to operate on either 24 V dc or 48 V dc.

Smart PoE LED indicators on the INJ-24A also convey the status at a glance so the system operator can immediately identify whether the PoE port is supplying power, and which power supply mode is currently active.

Moxa

www.moxa.com 

See other Control Engineering industrial network products here and linked below.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me