German Sedans Slip

Could Consumer Reports actually be correct in listing Japanese makes as tops in ratings for performance and reliability?

06/23/2008


A friend of mine hates Consumer Reports' annual auto ratings. When he describes how the magazine reaches its annual conclusions, he wets his finger, sticks it in the air and says, “They go whichever way the wind is blowing.”

If I were him, I'd hate Consumer Reports , too. He owns three German vehicles — an Audi, a Mercedes and a Volkswagen — all of which have received poor reliability ratings from Consumer Reports . He's convinced there's an anti-European and a pro-Asian bias at the Consumer's Union.

And now he has even more reason to hate Consumer Reports . Just as he was beginning to grudgingly accept the CR reliability ratings, along comes the magazine's luxury sedan performance ratings .

If you're a German car buff, this latest bit of news might make your blood boil. Recently, CR ran performance tests on four upscale sedans: The Cadillac CTS, BMW 328i, Mercedes-Benz C300 and Saab 9-3. The performance analysis — which is separate and distinct from the reliability ratings — is based on 50 individual tests, ranging from handling and acceleration to emergency braking and fuel economy. The result: The Cadillac CTS placed ahead of the BMW 328i and ahead of the Mercedes-Benz C300. Worse, when posted against earlier results for other luxury vehicles, the BMW placed fifth, behind the Infiniti G35, Acura TL, Cadillac CTS and Lexus IS250. The Mercedes C300 finished seventh, behind all of those and behind the BMW and Acura TSX, too.

For years, German cars have been the standard-bearer in luxury vehicle engineering. Even when the CR reliability ratings of BMW and Mercedes-Benz went south, many engineers argued that German vehicles were still far superior in performance and handling. Many contended Consumer Reports' reliability ratings had little meaning, since they were supposedly based on complaints involving minor systems, such as climate controls and audio. In the major components — engine, transmission, brakes, suspensions — German vehicles were still the best, they said.

Now that could change. The reliability ratings are growing harder to ignore. There, Mercedes-Benz and Volkswagen have done badly year after year, while Honda and Toyota have done exceptionally well. Mercedes-Benz and Volkswagen, for example, had no used vehicle models in Consumer Reports' Best of the Best list this year , while Honda had eight and Toyota had 15. The Best of the Best are directly related to vehicle reliability, which is derived from 1.3 million vehicle surveys.

Let's be clear about this: European luxury cars aren't bad vehicles. When all models are considered, Mercedes and VW collectively post some of the highest scores of any nameplate at CR's Auto Test Center. But the latest message seems to be that other vehicles are catching up on the skid pad while, at the same time, winning big in the reliability ratings.

Like my friend, many European car buffs have adopted a shoot-the-messenger mentality. Consumer Reports' testers, they say, don't recognize good engineering when they see it.

But is it possible 1.3 million responses could be wrong, year after year? Is it possible the annual battery of engineering tests is wrong, too?

Maybe it's time to admit Consumer Reports might actually be right.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me