Geisinger pioneers legionella control

In a groundbreaking effort, the Facilities Operations Group of Geisinger Health System, Danville, PA, developed a system to eliminate legionella bacteria from its domestic water supply. Their solution was the first successful system implemented at a hospital in the U.S. Test results conclusively prove that the organism is controlled and the safety of patients and staff is enhanced.

04/28/2003


In a groundbreaking effort, the Facilities Operations Group of Geisinger Health System, Danville, PA, developed a system to eliminate legionella bacteria from its domestic water supply. Their solution was the first successful system implemented at a hospital in the U.S. Test results conclusively prove that the organism is controlled and the safety of patients and staff is enhanced.

The main campus of the health system is home to a large medical center including a level one regional trauma center on a 460-acre site with 2 million sq ft of buildings and a 550,000-gal reservoir supplied by a well, a spring, and municipal water.

Statistics show that 50% of healthcare facilities harbor the dangerous legionella organism in their domestic water systems. Legionnaires disease is a type of pneumonia that is fatal if not diagnosed and treated early. A susceptible host contracts the disease by inhaling aerosolized water droplets containing the organism.

Tests using a heat-and-flush procedure provided only temporary improvements by killing legionella bacteria on the surface of the biofilm in the piping network. Bacteria deeper in the biofilm were not affected and re-emerged. Finally, a cure was found by injecting chlorine dioxide (ClO 2 ) into the water system and implementing a number of other changes:

  • Dead legs and distal sites in the piping system were removed

  • Old cross-flow cooling towers with 10-12-deg approaches were replaced with 5-deg approach counterflow towers with no sumps

  • Compressed air system has been converted to an entirely dry system by installing scroll compressors, variable-frequency-drive oil-free compressors, and heat-of-compression dryers

  • Regular flushing of hot-water storage tanks.

    • By combining research, problem analysis, system engineering, and improved practices, the problem of legionella bacteria has been eliminated.



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me