Gather the data to look at the true value of a safety system

“Safety system” is an apt description for a never-ending operational process.

11/04/2011


In the past 3 years, I have noticed a substantial increase (more than 700%) in the number of calls and e-mails I have received from colleagues and friends who are involved in various manufacturing operations.

The reason for the increase appeared simple: a request for help related to safety issues or compliance with OSHA regulations in their segments. I continue to experience resistance when explaining the basic fundamentals of safety to operation managers, most of whom appear to be committed only to throughput.

It is easily discernable that the majority of those who exhibit this lack of knowledge do not understand the long-term benefits of a serious and committed plant, equipment, and resource safety system. I deliberately do not use the words “safety program” here as the word “program” is best used to describe something that has a beginning and an end.

“Safety system” is an apt description for a never-ending operational process.

So why all the recent fuss? Well, in May of this year, OSHA announced a new initiative that will target the various metals industries, most of which are located in the Great Lakes Basin. This includes Wisconsin, Illinois, Michigan, Pennsylvania, New York, Indiana, and Ohio.

The astonishing thing about the calls and e-mails I have received is the mind-set of the friends and colleagues I have communicated with concerning compliance. Of the 317 emails and 281 phone calls I have received in the past three years, only six colleagues have expressed concern with upgrading their safety systems to improve operating safety standards, as opposed to the majority asking, “How can we become at least minimally compliant?”

In almost every case where safety systems have been correctly installed, an improvement in throughput has been realized. So why is there so much resistance to properly installing safety systems?

Because the overall perception from management and employees alike is that it’s a hassle and it means they must learn a new and/or improved method of producing goods.

The immediate reaction is, “Sheesh, well this will waste an incredible amount of time, resources, and finances.”

So let’s examine the true actual cost of not having a properly maintained safety system in place.
Consider whether any of the following are applicable and if any show an increase or decrease within your operations.

  • LTIs (lost time incidents)
  • RIs (recordable incidents)
  • Medical insurance claims
  • Workman's compensation claims
  • Increase in employee absenteeism.

If you are experiencing any one of the above listed items, I will wager you have issues with all of the other items. And if you want the full scope of the effect these have on your operations and bottom line, get together with your human resources, medical, engineering, and operations staff and start comparing notes and costs.

Once you start the process of actually mining the data, it is quite easy to demonstrate the true cost associated with not having a well-rounded safety system in place.

Once you have assimilated all of the costs and add these costs into the costing/profit margins of your operations, I can assure you that you will have the undivided attention of those who actually count the beans.

Contact Dyer at dyerjerry(at)gmail.com.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me