Gateway connects controllers, devices with PACs

This universal gateway enables more than 50 brands of plant floor controllers and devices to connect to ControlLogix and other Rockwell Automation PACs.

12/03/2009


Online Development cATM Universal Gateway
The cATM universal gateway data appliance enables more than50 brands of factory floor controllers and devices to be connected to RockwellAutomation controllers, eliminating the need to program message instructionsbetween controllers or other devices. It is available as a module that installsin a Rockwell Automation ControlLogix PAC, or as a standalone module for DINrail mounting. Either configuration delivers more than 130 protocols forconnectivity to thousands of plant floor devices. The new appliance features auniversal driver to connect to Ethernet and serial devices such as analyzers,bar code readers, weigh scales, RFID systems, serial printers and labelmachines. Target applications for this appliance include machine-to-machine (M2M)communications. All drivers are supplied with the module at no additionalcharge.

The gateway eliminates the need for custom programmed data

bridges and is supplied with a setup utility that uses intuitive screens and

drag-and-drop operation to configure data transactions between controllers. After

the module is configured, it automatically and transparently exchanges data

between controllers with no control program changes. Configurable data exchange

enables machine-to-machine connectivity for horizontal integration and

migration at the control level. The gateway also features a backplane interface

that enables direct access to data in the ControlLogix processor, or to other

PLCs/PACs through Rockwell Automation bridge modules. Connections to other

controllers or devices are made via the module's serial or Ethernet ports.
Online DevelopmentInc.
www.oldi.com



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me