GAS TECHNOLOGY: Air Curtains Can Make a Difference

Invisible Wall to Separate Environments


One of the most frustrating problems for industrial building energy managers is large openings between conditioned and non-conditioned spaces. Often dock doors, warehouse access doors and other openings need to be kept open to facilitate movement of personnel, equipment and goods. Unfortunately, these openings also represents a major building energy leak and source of indoor contamination. A solution to this challenge that is increasingly being used is air curtains, sometimes called air barriers. These can not only help reduce energy loss, but can prevent entry by other environmental contaminants such as fumes, dust and insects.


Challenges Where Environments Meet

Most industrial buildings have several openings to the outdoor environment, or openings between a non-conditioned warehouse environment and conditioned storage or manufacturing spaces. These are problem areas because forklift, conveyor and foot traffic require that doors be kept open much of the time. Yet open doors allow the escape of conditioned air and entry of outdoor air contaminants. Various solutions have been tried.

One approach has been to use suspended vinyl strip doors. While these can be effective in separating environments, they have several drawbacks. According to one industry spokesperson, “Vinyl strip doors are unsightly and do not provide effective environmental separation.”


Potential Visibility Hazard

Though quite transparent when new, vinyl strips quickly become scratched, stained and dusty, particularly if they are used for
motorized traffic, creating a potential hazard for traffic through or near the doors. When there is a breeze on one side of the door, they are of limited usefulness in preventing intrusion of outdoor conditions. They can require frequent maintenance because the strips are often damaged by forklift operations.

In addition to doors to the outside and between conditioned and non-conditioned spaces, another area where environmental separation is needed is entrances to refrigerated spaces and freezers, particularly where forklift transport is being used. Where these are high-traffic entrances, physical barriers like motorized doors or vinyl strips are impractical and inevitably slow down production. Here also, a better solution is needed.


A Better Solution for Reducing Infiltration

The approach that is gaining in popularity is the use of air curtains. These use an overhead air pressurizer that directs a narrow laminar flow of recirculated air down or across the door opening. This high-speed stream prevents entry of outdoor environmental elements and escape of conditioned indoor air. This is achieved without any visual or physical barrier to foot or motorized traffic.

Enershield Industries, headquartered in Edmonton, Alberta, is a manufacturer of air barriers for the U.S. and Canadian markets. Dan Hallihan is the Regional Manager for the firm and was a recent presenter at a Tecnology & Market Assessment Forum sponsored by the Energy Solutions Center. Hallihan indicates, “One of the greatest energy inefficiencies in any building is an open door. Enershield Air Barriers can create up to a 90% seal on open doors against a 15 mph wind. We supply our clients with an energy loss calculation using an ASHRAE formula to show what the client is losing in energy as well as what we can save them based on the amount of time the door is opened. “

Hallihan feels there are numerous locations in the industrial building where it is important to prevent the infiltration of outside air into facilities. “This not only affects indoor temperatures but in some cases also affects manufacturing processes. When outside air infiltrates into a facility, it puts an instant demand on either the heating or cooling system. The installation of an air barrier helps to reduce the cycle time of those systems and thus reduces wear and tear on those units and saves facility energy.”

Air curtains are often designed to start automatically when the physical door is opened and stop when it is closed. Often, conditioned warehouse facilities have rows of multiple bay doors. Where each of these is equipped with an air barrier, the indoor environment remains stable and comfortable, and temperature sensitive products and equipment are protected. Air curtains are available for doors in a wide range of sizes. Systems are available for openings as small as retail food takeout windows, or as large as aircraft hangar doors.


Air Barriers Withstand Tough Environments

Standard models are typically constructed of a welded, powder-coated frame with a galvanized metal jacket. Manufacturers also produce models for harsh, damp climates or areas that require a frequent washdown and need to be able to tolerate a wet environment. Other considerations in specifying an air barrier are building orientation to prevailing winds and the local climate.

Another provider of air curtains is Mars Air Systems of Gardena, California. Mars offers a broad line of air curtains for door and window openings of virtually all sizes. Betiel Abraham from Mars emphasizes that their air curtains help maintain comfortable indoor temperatures, so employee productivity increases and energy costs decrease. Abraham also points out that through the use of air barriers, an industrial or commercial facility can garner points toward a LEED certification.


Air Curtain Heating Available

For users of air curtains in cold climates, Mars offers doors that use heated air to increase comfort for workers near the opening. Several heating options are available, including electric, gas-fired hot air and steam heat. The Mars website includes a calculator to help owners determine potential energy savings through the use of an air door. According to Abraham, the doors can be installed over any door opening and are available in a variety of colors. “These can be customized to conceal into any opening and are available with a standard five year warranty on all unheated systems and and 18 month warranty on heated units.”

As energy costs become increasingly critical with tight manufacturing margins, the savings and improved environment realized from an air curtain can be important. Engineers have designed air curtains to solve the challenges of traffic safety, energy conservation, facility comfort and control of the indoor environments. Now is the time for owners to take a look at this valuable technology.


More Info

Biddle Air Systems


Mars Air Systems

Powered Aire, Inc.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me