FPL wind turbine hack a hoax

Not all reports of cyber incidents are real. Sometimes they turn out to be a hoax.

04/26/2011


Not all reports of cyber incidents are real. Sometimes they turn out to be a hoax.
That is what happened Saturday, April 16th, around 11 a.m. EDT when the Repository for Industrial Security Incidents (RISI) received the following email:

Subject: Florida Power & Light Company (FPL) Fort Sumner Wind turbine Control SCADA was HACKED

Message: Here comes my revenge for illegitimate firing from Florida Power & Light Company (FPL) … ain’t nothing you can do with it, since NM electricity is turned off !!! In some days this people will know about FLP SCADA security, here is it for you …. Secure SCADA better! Leaked files are attached

With that email message the person attached eight image files of various HMI screens, a Windows Explorer view of computer files and what appear to be views of a maintenance management/work order system. Also attached was a dump of the configuration from a Cisco router with addresses that are part of the Florida Power and Light assigned address space.

The same email was also sent to the seclists.org/fulldisclosure list, so you can view the files.

Since it appeared that the writer was referring to FPL’s New Mexico Wind Energy Center, John Cusimano, the Director of RISI, immediately contacted the ICS-CERT and the New Mexico CERT with the information. The CISO of FPL subsequently contacted Cusimano Sunday morning, informing him the whole event was a hoax.

In investigating this further, most, if not all of the incident was a hoax and an attempt to embarrass FPL, said Eric Byres, chief technology officer at Byres Security. You can tell it was a hoax because the HMI screen shots clearly appear to be samples from a vendor or a student experiment, not real HMI screens from a system the size of the PNM Wind Energy facility.

They also show a SINAMIC 120, which is a drive controller from Siemens and not something one would associate with a wind farm. One final clue is the idea the alarm text in the HMI shots are in German, not the usual language for a facility in New Mexico.

As for the maintenance management/work order system screen shots, these all appear to be from September 2009 from an unrelated FPL facility located in Seabrook Station in New Hampshire.

The router ACLs and the Windows Explorer view of the computer files are the only potentially convincing items in the collection. They did confirm the IP addresses were FPL’s in New Mexico.

For a more complete report, click here for Byres’ report.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2016 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me