FPGA chip controller for SERCOS III Ethernet devices
The SERCOS EasySlave is an FPGA-based single-chip controller for simple SERCOS III Ethernet slave devices.
SERCOS International introduced the SERCOS EasySlave, an FPGA-based single-chip controller for simple Sercos III Ethernet slave devices. It has a real time channel with one input and one output connection, and supports cycle times as low as 31.25 usec. An IP core is provided as a netlist for the Xilinx Spartan-6 FPGA family. The IP core contains all the functions of a Sercos slave connection, including the associated software library for I/O devices (e.g., analog inputs, encoders). I/O applications are synchronized in the Sercos cycle.
Technical support for the EasySlave is provided by Steinbeis Transfer Center for Systems Technology (TZS) in Esslingen, Germany. TZS offers an EasySlave evaluation kit to facilitate a quick and easy introduction to SERCOS slave development. The evaluation kit includes a development board based on a Xilinx Spartan-6 XC6SLX9 FPGA and can be extended using plug-in modules. The evaluation kit includes all other required material and documents (Ethernet cable, power supply, and documentation).
Various EasySlave licensing models are available from Sercos International, with Sercos member companies offered special prices. In addition, a license-free bitstream IP core version with a limited functionality is available, under the product name EasySlave-IO.
- Edited by Chris Vavra, Control Engineering, www.controleng.com
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.