Ford to start $773 million plant expansion in Michigan in 2013

Six facilities to get new equipment, technology; 2,350 jobs created

12/28/2012


Ford Motor Company is spending more than $773 million on new equipment and capacity expansions across six manufacturing facilities in southeast Michigan as it delivers on a commitment to invest $6.2 billion in U.S. plants by 2015. Courtesy: Ford Motor ComFord Motor Company is spending more than $773 million on new equipment and capacity expansions across six manufacturing facilities in southeast Michigan as it delivers on a commitment to invest $6.2 billion in U.S. plants by 2015.

The investments in Michigan will create 2,350 new hourly jobs and allow the company to retain an additional 3,240 hourly jobs. The 2,350 new positions are part of the 12,000 hourly jobs that Ford is adding across the U.S. by 2015.

“Even as we wrap up an incredibly busy year of capacity expansions and product launches, we are continuing to look to the future,” said Jim Tetreault, Ford vice president of North America Manufacturing. “These investments, many of which are already under way, will ensure our southeast Michigan manufacturing facilities can support our aggressive growth plans.”

Expansion work at several plants started earlier this year to increase Ford’s capacity to provide transmissions and axles to support growing demand for fuel efficient vehicles and F-Series pickup trucks.

In addition, over the next six months Ford will bring a new stamping press on line at Michigan Assembly Plant; install equipment for four new stamping presses at Dearborn Stamping Plant; and finish expansion work at Flat Rock Assembly Plant to produce the new Fusion next year.

Specifically, Ford is making investments at the following locations: 

  • Michigan Assembly Plant - $59.4 million for stamping press line expansion
  • Dearborn Stamping Plant -$305 million for plant modernization, new press lines, scrap conveyor system and other machinery and equipment
  • Flat Rock Assembly - $161 million for machinery and equipment to assemble the new Ford Fusion and as an additional production facility
  • Sterling Axle Plant - $86 million for machinery and equipment investment to meet axle demand increase and future model changes
  • Van Dyke Transmission - $87.7 million for machinery and equipment investment to meet capacity expansions for 6F35 and 6F50 transmissions
  • Livonia Transmission - $74.7 million for machinery and equipment investment for transmission expansion and test equipment 

Source: Ford Motor Company.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me