Florida, Carolinas getting $500M Smart Grid upgrade

U.S. Dept. of Energy awarded $200 million to Progress Energy to upgrade two electric utilities to a Smart Grid system.

03/10/2011


Progress Energy is moving forward with its plan to spend $500 million to upgrade two of its electric utilities in Florida, North Carolina, and South Carolina to a Smart Grid system.

Together the two utilities provide electricity service to more than 3.1 million customers. The Raleigh, N.C.-based company is paying for the upgrade in part with a $200 million grant from the U.S. Dept. of Energy (DOE). The grant came out of the American Recovery and Reinvestment Act of 2009, and is part of the high-profile push by the Obama administration and many state leaders to upgrade U.S. electric grids.

Progress Energy plans to use IBM's WebSphere software platform as a tool to integrate distribution management and demand response systems. IBM has also been hired to help install and implement the systems in conjunction with Progress Energy.

IBM has run several pilot programs to test smart-grid systems in the past four years, including a consumer-level one in North Carolina in 2009 which found that on average, the introduction of smart-grid technology and smart meters cut electricity use by 15%.

In the case of Progress Energy, however, IBM's services will concentrate on equipment and system upgrades, analytics, and management that will enable the company's utilities to better control things like voltage levels, as well as electricity distribution across power lines.

IBM is one of a number of blue-chip companies getting into the smart-grid industry in recent years through software and services. Many of them have done so by buying smaller companies with existing technology, as is the case with Johnson Controls' purchase of EnergyConnect, Honeywell's purchase of Akuacom, and Siemens' acquisition of Site Controls.

- Edited by Bettina Chang, Consulting-Specifying Engineer, www.csemag.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me