Finding help with energy projects

Finding help for your energy project can be challenging in the U.S. and Canada, but there are hundreds of assistance programs available.


Major energy-related facility improvements, such as here installing a boiler economizer, can often receive grant, engineering or loan assistance from government or utilities. Photo courtesy Resource Recovery Company"Where can I go for help with this energy project?" This question is asked many times by business managers and project engineers. Because of the federated-type governments of the U.S. and Canada, answers can be complicated and will vary from state to state, province to province. Further, most natural gas distribution companies have customer assistance programs, specialized rates and sometimes even project grants, but these vary from state to state, or even within certain economic incentive zones. They key is finding the opportunities, and then asking for help.

Project payback often critical

Typically, owners of commercial, institutional and industrial facilities decide whether to proceed with energy improvement projects based on simple payback—how many months or years it will take for the improvement to pay for itself. A payback in six months is relatively easy to sell: One taking eight or ten years is tougher unless the owner is quite sure the facility will still be in use at that time, and investment dollars are available. Even if the dollars are there, the energy project has to compete with other potential uses like process efficiency improvements or facility expansion plans.

Shortening the payback

Here's where government and utility consulting and incentive programs can help shorten the payback. One example is interruptible gas rates. Many gas suppliers—both regulated distribution companies and third party suppliers—offer attractive rates for gas users who will agree to tolerate periodic interruptions of service. An example might be replacing an electric or oil-fired piece of equipment with a natural gas device on an attractive interruptible rate. Ask your gas supplier about interruptible rates, and get details on exactly what your commitment would be. Some suppliers use the service interruption very infrequently but offer a significant discount. This could further shorten the energy improvement project payback.

Another possibility is actual incentive payments from federal or state energy or environmental agencies, or from your utilities themselves. These incentive programs are intended to encourage owners to take energy improvement steps now rather than waiting. Programs include direct grants, tax credits, financing assistance and project engineering assistance.

Finding current incentives

Programs are numerous, but are constantly changing so it's important to know you are acting on current program requirements. Often your project engineer or your utility customer representative can help you find these. Another great resource for U.S. owners searching for help is this website

Canadian owners can similarly benefit from this website:

These resources summarize federal, state, provincial and utility incentive programs for improving facility energy efficiency. Payback should not be the only criterion for embarking on a facility energy efficiency project. Such projects may also improve your compliance with present or future environmental regulation, and may increase your energy supply security status. If you are considering embarking on such a program and are looking for a partner, your own gas utility, along with the website tools shown above, may be the right place to put in your shovel.


Small Business Administration Energy and Environmental Grants and Loans 

U.S. Environmental Protection Agency Green Building Requirements 

This article originally appeared in the Gas Technology Summer 2015 issue.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me