Find the point of constraint to fix plant inefficiencies

Measure where your process slows down, then pull resources together to speed it up

05/03/2007


Plant managers get more information than ever. For some, the issue is not measuring the performance of equipment as much as it is managing the mountain of data that come streaming out of PLCs, probes and sensors. At its Performance Management Executive Breakfast on April 30 in Chicago, officials from Activplant, Microsoft and Deloitte discussed the idea of finding the places on the manufacturing line that needed the most attention and spending resources to solve those specific problems.

“We need to reduce the overproduction of information,” said Doug Gish, principal with Deloitte. “We need to expand our definition of waste in manufacturing to include information. Let’s make sure we expend time where it matters.”

One way to do that, according to Activplant founder and chief product strategist Dennis Cocco, is to find where the constraint to productivity is on a manufacturing line. “Instead of focusing on individual workstations’ performance, downtime and lifecycles, focus on the flow of product through the facility and understand the chronic disruptors to product flow,” Cocco said.

“I feel sorry for plant managers,” Cocco said. “They’re dealing with a highly chaotic environment.” He cited the pressure to reduce per-piece costs at a time of limited resources and capital, and a lack of visibility and clarity to the information flying around the plant.

Rather than focusing on events, such as bearing failures, Cocco said trending of manufacturing line performance helps focus attention of where the process slows up. Fixing those consistent constraints, he said, drives up productivity and frees resources for use elsewhere. “Where do you invest your productivity?” Cocco asked.

Coca Cola Amatil of Australia is an Activplant client and has used its Throughput Analyzer to focus on constraints in the bottling and canning process. “Activplant didn’t solve the problem,” said Wayne Luxford of Coca Cola Amatil. “Precise, accurate and continuous data pointed us in the right direction. It gave us the data to solve the problem.” The result was an increase of 500,000 cases a year of product created without increases in labor costs.

“It’s about having information and choosing what you do with it,” Activplant president Chuck Frosst said. “How do you lead that change in your organization? Am I driving a culture that shows each employee that when they improve a process, they are adding value to the organization and not just doing a job?”

Plant floor workers, Cocco said, have the experience to understand many of these problems, and involving workers in acting on the information is crucial. “Operator involvement is often overlooked,” Cocco said.

“We’re buried with data, but there’s not enough information,” Gish added. “You need to look at what are the three to five key things I need to look at to understanding the health of my organization.” %%MDASSML%% Bob Vavra





The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me