Fieldbus Foundation now certifies hosts?

Recent announcement says the Fieldbus Foundation will be certifying hosts, as well as devices.

04/22/2011


Dear Control Engineering: Looking at the article about the Fieldbus Foundation registering hosts, I was trying to figure out what that means. Are the device manufacturers now telling the control platforms how to communicate? Isn’t it usually the other way around?

There’s more to effective communication than simply providing a channel. You could have the finest telephone system ever built, but if the two people talking don’t speak the same language, speech may be exchanged, but there will be no communication. The same applies with field devices and control systems.

Foundation fieldbus is a communication channel. It provides an infrastructure for efficient communication between field devices and a host, which is normally some type of control system, but as the article points out, a host can be an HMI, alarm panel, recorder, or whatever. It isn’t difficult to get the device and host exchanging basic information such as process variables, but sometimes the more sophisticated stuff can be a greater challenge.

One area that has been particularly problematic is asset management. Trying to get a field device to deliver meaningful diagnostic information to a host is complicated because the device may not be sending it in the way the asset management system wants to receive it. Companies that want to use the diagnostic capabilities of FF don’t like it when they have to find ways to get incompatible things to speak the same language and communicate.

Industry consultant Herman Storey characterizes the situation and the latest development this way: “There were two big problems. First, devices had configuration elements that were not standardized well enough that a host could easily download all configuration parameters. The basic stuff worked, but there was always something that didn’t work. Second, device diagnostics were not interoperable. Devices had information that hosts were not prepared to accept. These problems resulted in a lot of proprietary workarounds that were costing a lot of money on the project side, and limiting payback to end users by limiting achievement of full functionality unless the host and device came from the same vendor. These problems are system-level problems that require system-level solutions, but this is difficult in many organizations because only device guys are involved. The FF team has been attacking these problems at a system level, and the announcement just made is a major step in resolving these problems and making systems behave properly in general.”

This host profile is a significant advance in that it is creating a mechanism for greater interoperability between manufacturers and simplifying the work of end users working on new installations. As more companies implement it, there will be more platforms and devices from a variety of sources that will interact seamlessly via Foundation fieldbus.

Read Device Diagnostics and Asset Management by Herman Storey

Peter Welander, pwelander@cfemedia.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me