Feeling the pinch

The 2008 Plant Engineering Salary Survey paints a vivid picture. The numbers are one story, but that story is not just about compensation. Manufacturing in America faces change coming in many forms – from a new federal administration to new challenges to grow in a tough economy. But Plant Engineering readers remain optimistic about their future and the future for their employees.

01/01/2009


The 2008 Plant Engineering Salary Survey once again paints a vivid picture. The numbers are one story, but that story is not just about compensation. Manufacturing in America faces change coming in many forms %%MDASSML%% from a new federal administration to new challenges to grow in a tough economy.

Plant Engineering readers remain optimistic about their future and the future for their employees, though not at quite the levels of a year ago.


The salary figures from 2008 show a trend similar to a year ago. Almost 18% of a plant manager's average compensation is from bonuses and profit sharing programs tied to issues such as productivity gains and cost savings.

Once again, plant leaders were incented with additional compensation, and once again they were rewarded for their efforts.

There were continuing fluctuations in pay based on the region or on the industry. The North Central region, which includes most of the Plains states, had the lowest average salary at just over $90,000. The Southwest, which includes most of the oil and petrochemical industry, continued to show sharp increases in wages. The average salary there jumped from $108,699 in 2007 to $122,309 in 2008. That region's salary has climbed 20% in the last two years.

The Southeast, which has seen the fastest rise in salaries in recent years due to the influx of non-Detroit automakers, leveled off a bit in 2008. Compensation was at $103,564, about the name as the national average and down just slightly from 2007.

Not surprisingly, oil and gas plant manager salaries are the highest in the industry, averaging more than $142,000. Salaries in the beverage and tobacco industries also are high at more than $125,000, followed by the chemical industries. All three of these “consumable manufacturing” segments continue to experience some growth even in the recession.

Still, few industries showed a drop in 2008. Textiles, wood products, printing and metals are all industries under significant international pressures, yet all showed solid salary increases in 2008.

However, many high-cost industries such as machinery, appliances and furniture felt the pressures of foreign competition and high domestic layoffs. All three industries fell sharply, with furniture salaries dropping 24% and appliances slipping 18.6%.

In our Manufacturing Pulse section of the survey, most plant managers see compensation staying much the same in 2009. While only 13% predict salaries will rise more than 4%, just 4% predict a decrease and 58% see an increase of between 1% and 3%. They also see a relatively stable workforce, though more predict a decrease (24%) than an increase (19%). The other 58% see staffing levels remaining the same in 2009. Only 40% see new lines or products added in 2009 as plants try to weather the storm of the recession.

Perhaps one of the ironies of the recession is that plant managers who might have considered retirement in the next couple of years may have to forestall that decision in the face of weakening personal finance performance in 401K and pension plans. The impact of this will be an important trend to watch in 2009.

With more responsibility (plant size, employees supervised, maintenance budget) comes more compensation, but perhaps the biggest indicators of a plant manager's salary are experience and education.

Plant managers with more than 20 years experience earn more than 25% more than their counterparts with less than five years experience. Those plant managers with a master's degree (and about 18% of all survey respondents have one) earn almost 50% more money than managers with a high school diploma, and almost 24% more than those with a bachelor's degree.

Energy issues were a major concern in June when gasoline prices topped $4 a gallon in parts of the nation and oil threatened to shoot past $150 a barrel. Those prices have subsided in the midst of the global recession, and survey respondents see energy prices as having little impact on their operations. Only 19% of respondents said prices forced a cut in production, staff or both.

Sustainability, on the other hand, continues to rise as a prominent issue on the plant floor, with 85% saying sustainability is a factor in the company's operational decisions.

So amid all these challenges, what continues to drive plant managers to achieve? The same things that got them into manufacturing in the first place. A feeling of accomplishment was cited by 52% of respondents, followed by the technical challenges of manufacturing and then the salary. Their job security, the on-the-job benefits and their relationship with others in manufacturing were also cited by at least 20% of respondents.

The skill needed to run a modern manufacturing plant extends beyond the technical knowledge. Plant managers say project management, computer, communication and team-building skills are the keys to a successful plant today, ahead of finance, language or marketing expertise.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me