Even robots are having trouble finding work

North American-based robotics companies report that new orders sold to North American manufacturing companies fell by 21% in units and 16% in dollars in 2008 compared to 2007. The sharp decline accelerated in the fourth quarter when orders fell by 26% in units and 33% in dollars compared with last year.

03/01/2009


North American-based robotics companies report that new orders sold to North American manufacturing companies fell by 21% in units and 16% in dollars in 2008 compared to 2007. The sharp decline accelerated in the fourth quarter when orders fell by 26% in units and 33% in dollars compared with last year.

A total of 12,557 robots valued at $894.9 million were ordered by North American companies in 2008, down from 15,856 robots valued at $1.07 billion last year. When sales to companies outside North America are included, the totals are 14,109 robots valued at $979.4 million, a drop of 18% in units and 15% in dollars.

“2008 was extremely difficult for our members and 2009 likely will be a very rough year as manufacturing companies throughout the world deal with the global economic crisis,” said Jeffrey A. Burnstein, executive vice president of Robotic Industries Association (RIA), the industry's trade group.

“Capital equipment expenditures are slowing dramatically in the automotive industry, traditionally the largest customer for robotics. In 2008, orders from automotive OEMs and their suppliers fell 37% in units and 32% in dollars,” Burnstein said.

Despite the current difficulties in the automotive industry, there is reason for optimism, said Tammy Mulch of ABB Robotics, chair of Rica's Statistics Committee.

“In times of rising energy costs and rising environmental awareness, the demand for smaller, more economical, environmentally friendly and lower cost cars are becoming increasingly important,” Mulch noted. “In order to meet these demands in the short term, the car companies will have to restructure and to speed up development of these types of new models. I am sure the automotive industry will introduce new cars with less consumption, reduced emission and innovative technology. This will require new automation technology throughout the value chain. Robotics will surely benefit from such investments,” she asserted.

Burnstein noted that there's also reason for optimism based on the strong non-automotive results in 2008.

“Non-automotive orders rose 9% in units and 7% in dollars over 2007. The strongest gains came in the semiconductor/electronics/photonics markets, where units rose 63% and dollars jumped 55%. Plastics and rubber orders increased 39% in units, 12% in dollars, while food and consumer goods saw increases of 3% in units and 51% in dollars,” Burnstein explained.

“Non-automotive orders actually topped automotive orders, in terms of dollars, for the first time since we began collecting numbers 25 years ago,” Burnstein noted. “In terms of units, the breakdown was 51% automotive, 49% non-automotive. This is very important for our industry as we continue to make progress in reaching new customers.”

RIA estimates that more than 186,000 robots are now being used in the United States, placing the U.S. second only to Japan in overall robot use. It's estimated that more than one million robots are being used worldwide, with countries such as China and India rapidly expanding their investments in robotics.

“Despite the financial crisis, there are great opportunities to expand the use of robotics in North America,” Burnstein said. “In 2009, we're holding our International Robots, Vision & Motion Control Show (June 9-11, Rosemont, IL) that highlights the latest products and solutions. The show is held just once every two years and gives users and potential users a great way to find answers to their manufacturing challenges.

“The need for improved productivity and product quality, flexibility, speed %%MDASSML%% these challenges don't disappear, if anything they become greater, when there's a downturn. We're hopeful that the show will be a catalyst to stimulate the market in the second half of the year,” Burnstein said.

Robot sales to manufacturing fell 18% in 2008, and industry experts don't expect things to get much better in 2009.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me