Engineers battle NYC mayor over building commissioner position

The mayor wants to drop the requirement in the City Charter that only a registered architect or licensed engineer can hold the position, according to the New York Times. By doing so, Mayor Bloomberg hopes to deepen the pool of commissioner candidates.

06/19/2008


Engineers and architects are fighting Mayor Michael Bloomberg’s efforts to downgrade the qualification requirements for the city’s building commissioner: The mayor wants to drop the requirement in the City Charter that only a registered architect or licensed engineer can hold the position, according to the New York Times.

 

The mayor, with the support of City Council speaker Christine C. Quinn, seeks to deepen the pool and managerial talent of candidates for the position, which has been vacant since

Patricia Lancaster, an architect, resigned last month

.

 

However, professional societies of architects and engineers, and the New York Building Congress, said only a technical expert is capable of running a department that handles a range of responsibilities, which include enforcing safety laws, building codes, and zoning regulations; and curbing fatal construction accidents at a time when New York is struggling to keep pace with a building boom.

 

"I'm tremendously concerned about construction site safety,” said John F. Hennessy III, chairman of the American Council of Engineering Companies, “but I’m also concerned about the long-term safety of buildings. Materials, products and building systems approved today have to last for the next 40 years.”

 

Under the mayor’s proposal, the commissioner would not have to be an architect or engineer as long as the first deputy is.

 

Architects and engineers have testified, petitioned and lobbied against the idea. If the measure is approved, Robert P. Stelianou, president of the New York State Society of Professional Engineers, said his group will sue.

 

Behind the debate stirs a city agency desperately trying to add inspectors as accidents mount. Its chief crane inspector was arrested on charges of taking bribes . Deaths from construction-related accidents have climbed to 15 this year, up from 13 in all of 2007.

 

The mayor has gained some support for his effort within the Council, the State Legislature, and the construction industry.

 

Quinn said the department should be “led by people who are both good managers and have the technical training and expertise to oversee and understand all of what falls within Buildings’ purview.”





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me