Embedded vision system has Intel Core i7, 4 gigabit PoE ports

Adlink's EOS-1200 uses the 2nd Generation Inter Core i7 quad core processor, providing four independent gigabit PoE ports with transfer rates up to 4.0 Gb/s.


Adlink's EOS-1200 uses the 2nd Generation Inter Core i7 quad core processor, providing four independent gigabit PoE ports with transfer rates up to 4.0 Gb/s. Courtesy: Adlink TechnologyAdlink Technology Inc. released the EOS-1200, a Gigabit PoE embedded vision system that implements the 2nd Generation Intel Core i7 quad core processor, providing four independent gigabit PoE (power over Ethernet) ports with data transfer rates up to 4.0 Gb/s. The EOS-1200 further supports IEEE 1588 precise time protocol, enabling synchronization with multi-camera acquisition. With superior computing power, multi-channel support, compact size, lower unit cost, and maximum flexibility, the EOS-1200 is ideally suited to multi-camera imaging applications such as factory automation and food and packaging inspection.

The EOS-1200 supports IEEE 1588 PTP technology, providing a software trigger-mode that empowers multi-camera synchronized captures. Combining IEEE 1588 and PoE support to allow a single Ethernet cable to deliver power supply, data transfer, and data synchronization, the EOS-1200 reduces cabling requirements, further decreasing maintenance burdens and total cost of ownership.

In addition, the EOS-1200 provides smart PoE function, the application programming interface (API) allowing users to program power status easily, especially when cameras are idle, impressively boosting energy efficiency. The EOS-1200 also provides auto-detection to ensure compatibility with both PoE and conventional non-PoE devices.

The EOS-1200 features I/O capability, including four serial ports, two USB 3.0 ports, 32 PNP/NPN isolated digital I/Os and dual storage (two SATA interface, and one CFAST slot), an internal USB port, and 1 kbit programmable EEPROM, all making the EOS-1200 simple to integrate and deploy, and providing management with copy protection and software license authentication for system development, further accelerating time-to-market. Driver support is provided for Windows 7/XP and Embedded standard 7, in both 32-bit and 64-bit versions.

Adlink Technology


- Edited by Chris Vavra, Control Engineering, www.controleng.com


No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.