Embedded applications: Gigabit Ethernet, managed switches
Briec-de-l´Odet, France – Interface Concept announced the ComEth4070a family, a line of 6U VME L3 fully managed Gigabit Ethernet switches for embedded applications. The series uses the latest generation Gigabit switch engine and PHY transceiver, combining a layer 2+ switch and a full layer 3 router in a single board with optimized power consumption.
Briec-de-l Interface Concept 6U VME L3 fully managed Gigabit Ethernet switches for embedded applications
Interface Conceptannounced the ComEth4070a family, a line of
6U VME L3 fully managed Gigabit Ethernet switches for embedded applications
. The series uses the latest generation Gigabit switch engine and PHY transceiver, combining a layer 2+ switch and a full layer 3 router in a single board with optimized power consumption.
Interface Concept has a managed Gigabit Ethernet switch for embedded applications.
For a related article from Control Engineering with links to many related Ethernet resources, read: "
The Interface Concept switches support full-wire speed L2 bridging and IP routing with L2-L4 Access List for classification, filtering and prioritization. The queue priority eight levels combine with quality of service (QoS) policy to make it easier to tune jitter in critical applications. Also included are 24 Gigabit Ethernet ports with a full-wire speed switching capacity of 37 Mpps.
Twenty Gigabit Ethernet ports are routed on P0 & P2 rear connectors; four more Gigabit Ethernet channels are available on the front or via the P2. The front option provides four 1000BT (RJ-45) ports or, optionally, 1000SX/LX fiber channels. Switches are fully managed and can be monitored from a browser, a remote application, a CLI, or SNMP.
Switchware software provides Layer 3 functions that allow static and dynamic protocols (RIP, OSPF), IP routing, proxy-ARP and DHCP-relay. IP protocols are carried out by the processor, and forwarding by a full-wire speed L3 engine router. Switches can be used in environments with operating ranges from standard, extended rugged, and conduction-cooled grades.
Prices start at $ 5,200 in low quantities.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.