Electrical engineer, arc flash expert: 2011 IEEE Richard Harold Kaufmann Award

David D. Shipp recognized for contributions to the design, analysis and protection of electrical power systems and personnel in industrial and commercial applications.

04/27/2011


David D. Shipp, an engineer whose many areas of expertise have improved electrical equipment and systems reliability as well as workplace safety in many industries, has been honored by IEEE with the 2011 IEEE Richard Harold Kaufmann Award.

The award, sponsored by IEEE Industry Applications Society, recognizes Shipp for contributions to the design, analysis and protection of electrical power systems and personnel in industrial and commercial applications. The award will be presented on May 4th, 2011 at the Industrial and Commercial Power Systems Technical Conference in Los Angeles, Calif.

For 38 years Shipp has worked at the forefront of power technology, contributing important solutions in areas ranging from power systems analysis, failure investigations, design and protection to power quality to arc flash solutions and safety measures. Shipp’s arc flash studies have resulted in mitigation methods and solutions that have saved lives and reduced injury and risk to maintenance personnel. An arc flash is a short circuit through the air from one exposed conductor to another with excessive heat/energy being released. Arc flashes can damage equipment and cause injuries to nearby people. His patented Arc Flash Reduction Maintenance System has been incorporated into overcurrent protection devices, improving electrical workplace safety across many industries.

Shipp was instrumental in determining why massive internal ground fault damage was occurring in industrial generators and how to mitigate it. Shipp was a key participant in an IEEE team that determined the accepted generator ground fault current selection for design/standards at that time was too high. The Hybrid High Resistance Grounding system was developed to automatically switch the generator ground fault level to a lower level when an internal ground fault was detected, which greatly reduced damage to the generator for internal faults but permits higher levels required for the external power system. The work resulted in revisions to the American National Standards Institute (ANSI)/IEEE generator standards.

Another of Shipp’s areas of expertise is power quality. Power quality pertains to making sure systems and equipment function correctly without loss of performance. As more electronic-type loads proliferate into industry, their sensitivity to harmonics, improper grounding and voltage variations can take a toll on equipment. Shipp’s contributions in this area augmented other engineers with techniques and methods to efficiently and cost effectively solve power quality problems. His work on harmonics became the basis for Chapter 10 of the ANSI/IEEE Standard 399, “Recommended Practices for Power Systems Analysis.” This book is used by engineers worldwide as the basic text on the subject.

Present day activities focus on medium voltage switching transient induced failures. Over the last several years, there have been many unexplained transformer or motor failures associated with breaker switching. Shipp’s power system analysis approach identifying the root cause and solutions are setting new standards and practices.

An IEEE Fellow, Shipp owns three patents and occasionally serves as a legal expert witness. He received Hart E+P magazine’s Meritorious Engineering Award for two different applications involving submersible pumps for the oil industry. He also received the Engineer of the Year Award from Eaton Electrical for his arc flash efforts. Shipp received a bachelor’s degree in electrical engineering (power option) from Oregon State University, Corvallis. He began his career in 1972 at Westinghouse Electric Corporation. Since 1998 he has worked for Eaton Electrical, Warrendale, PA, where he is a principal engineer.

www.ieee.org

IEEE

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me