EC: Ti125 Thermal Imager

Hardware - Handheld test, measurement, calibration: The Fluke Ti125 thermal Imager is a high-performance, fully radiometric infrared camera for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others. This is a Control Engineering 2013 Engineers' Choice Award winner.


The Fluke Ti125 thermal Imager is a high-performance, fully radiometric infrared camera for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others. This is a Control Engineering 2013 Engineers' Choice finalist.The Fluke Ti125 Thermal Imager has a broad range of powerful capabilities that are so easy to use they can become a regular part of troubleshooting and diagnostic routines, including: IR Optiflex Focus System Automatic focus with a manual focus option for close-ups, IR Optiflex makes it fast and easy to take sharply focused, accurate images. IR-Fusion Technology is used to make this the industry's only point-and-shoot IR-Fusion infrared camera.

Fluke patented-technology blends digital and infrared images into one image to precisely document problem areas. It weighs 1.63 pounds and is balanced to sit perfectly in the hand, and all buttons are within gloved-thumb reach. Light enough to aim either vertically or horizontally and to use for long stretches without tiring out your hand. Built rugged Fluke thermal imagers are built to be put to work. What other infrared camera is tough enough to survive drops up to 6.5 feet and go right back on the job? Multi-mode video recording Record focus-free video in visible light and infrared with full IR-Fusion capabilities. Monitor processes over time, troubleshoot frame-by-frame, and create infrared video reports.

IR PhotoNotes' annotation system captures up to three digital photos per thermal image file and keep an exact record of equipment models, nameplates and other useful information. Electronic Compass makes sure you and others know the location of the problem by saving the compass reading with the thermal image.  Fluke Corp.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me