Domestic oil sources drying up?

08/19/2010


An interesting article recently made the point that crude oil production from Alaskan fields is declining, and the big pipeline that brings product south is reaching the point where it is turning into a maintenance problem. Long story short, these days the pipeline is delivering less oil, which increases problems with corrosion and damage from the environment. You can walk faster than the flow velocity.

The fields in Alaska that have been the biggest producers are declining and there isn’t much enthusiasm for expanding drilling, especially offshore. Of course there’s no interest in expanding offshore drilling anywhere around here these days, especially the gulf. This will be a problem in the long run. The Alaska pipeline needs some work, but if drilling continues to be restricted, there is little incentive to fix it.

Unless these situations change and reverse the downward production spiral, the only alternative is increasing imports or cutting consumption. As discussed here last March, consumption in North America is below its peak in 2007, and refiners are cutting capacity. I don’t have the most recent statistics, but domestic production has probably dropped even more, which means oil imports are creeping up again.

If you were to ask most Americans if they would be willing to change their behavior, in this case make a personal effort to reduce oil consumption, you probably wouldn’t get many who would take up the challenge. Of course nobody wants to see oil spills here, which is why imports will go up. Importing oil allows us to export most of the risk and mess. Seeing TV coverage of a spill or other damage somewhere in South America or Africa doesn’t carry the same impact as tarballs washing up in Louisiana.

Maybe that’s a cynical attitude, but consider this: Frito-Lay brought out a new type of bag for its Sun Chips products. The bag is compostable and biodegrades. It’s made from vegetable products. Those are good things, right? Sales of Sun Chips have declined since the bag’s introduction. The complaint? The bag makes too much noise. So much for changing behavior.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me