Does the European market for data center power distribution products have untapped potential?

Data center power distribution in Europe accounts for a very small amount of the $440 million accumulated in 2011. The potential for a growing market exists, but a lack of visibility and investment remains a hurdle.

05/21/2012


With an estimated size of around $50 million in 2011, EMEA’s market for three-phase data center power distribution hardware was smaller even than that of Asia’s developing markets. A new study by IMS Research, recently acquired by IHS Inc., shows that the global data center power distribution market was worth $440 million in 2011; the Europe, the Middle East and Africa (EMEA) market accounted for only 11% of this, with most revenues coming from the Middle East. However, because EMEA’s markets for both data centers and uninterruptable power supplies (UPS) are of similar size to those in the Americas, it is possible that EMEA is merely an untapped potential waiting to become the next $100 million dollar market by 2016 for these types of specialty power distribution products.

The study considered product hardware for the three-phase power distribution market including transformer-based power distribution units (PDU), remote power panels (RPP), static transfer switches (STS), overhead busway, and branch circuit monitoring (BCM). With a high price tag, commanding upwards of $30,000 for just one unit, transformer-based PDUs make up 37% of hardware revenues. As most of EMEA, with the exception of the Middle East, uses 400/230 Vac distribution, the need for the step-down voltage transformation provided by PDUs is unnecessary; this eliminates the potential for upwards of $100 million in revenues from PDUs in EMEA.

“The lack of need for a step-down transformer is just one of the reasons for the difference in size between the American and EMEA markets,” says IMS Research market analyst Lori Lewis. “Instead of using expensive hardware such as PDUs and RPPs, the market has been satisfied by local panel builders using generic equipment to build low cost wall panels.”

Furthermore, limited visibility and product knowledge of the more relevant equipment, such as overhead busway, have delayed significant sales in EMEA. Overhead busway offers the benefits of bringing circuit breakers closer to the loads without consuming floor space while also allowing for much more flexible reconfigurations in the ever-changing data center environment. “Because this product was developed as an alternative to the transformer-based PDU, most manufacturers of overhead busways and their installed user base are in the US. Therefore, the market for overhead busway has yet to establish itself in EMEA,” explains Lewis. “Should more companies begin to showcase busway products in EMEA data centers, the more likely these products will catch on in the region.”

Universal Electric has been selling its Starline track busway product into European data centers through European resellers for a few years now. More recently, Power Distribution, Inc. signed an international licensing deal with UK-based Mardix to sell PDI’s overhead busway line in EMEA. Such expanded marketing is what is needed to bring three-phase power distribution products into EMEA data centers and create product awareness in equipment such as branch circuit monitoring and overhead busway. “We feel that there is a market for these products in EMEA, but until more suppliers begin exploring these opportunities for growth, it is likely to take longer than five years before EMEA hits the $100 million dollar mark.”



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me