Does discrimination -- like life -- begin at 40?

Under the Age Discrimination in Employment Act (ADEA), age 40 is the threshold at which protection begins.

10/01/1999


Under the Age Discrimination in Employment Act (ADEA), age 40 is the threshold at which protection begins. With this thought in mind, Maintenance Supervisor Frank Gray, 31, formulated his plan to get rid of Electrician Grade I Tom Lucas, 59, and replace him with a younger, more energetic man.

It was no secret in the department that Gray, who was brought in to replace the recently retired department head, wanted to "recharge the operation" with younger employees. But Gray was savvy enough to know that under ADEA you can't simply fire a worker because of his age. Hence the ambitious supervisor developed a plan to rejuvenate the department, make it more productive, and thus advance his career.

His plan was simple enough. Lucas' performance record, though marginal, was within acceptable bounds. Gray suspected if he fired the electrician and replaced him with a younger man he would be subject to charges of age discrimination. But not if his replacement exceeded the ADEA guideline. With this idea in mind, Lucas fired Gray and hired Philip Stone, age 41, in his place. This, he reasoned, should get him off the ADEA hook.

It didn't. Lucas protested the firing, claiming as Gray expected he would, that he was terminated because of his age in violation of the law.

"No way!" Gray countered. "If I were guilty of age discrimination would I have hired a guy over 40 to replace you?"

Lucas refused to settle for this explanation. When he threatened to sue, Gray took his case to his boss.

Question: Can Gray make the dismissal stand up?

Marshall's verdict: Gray's preference for younger employees was not unknown to Plant Engineer Steve Marshall. Reviewing Lucas' employment record, he asked Gray, "It seems obvious to me that you want to get rid of this man because of his age. I don't have to tell you age discrimination is illegal."

"I realize that," Gray replied. "But under ADEA the designated threshold is 40. Since I replaced Lucas with a 41-yr-old applicant, how can I be accused of age discrimination?"

"Simply enough," Marshall said. "I'll concede that replacing Lucas with a man in his 20s or 30s might make the age discrimination more obvious. But from a moral, and perhaps even legal standpoint, given Lucas' acceptable performance record, and with 41 being substantially younger than 59, I suspect any judge worth his salt would see through your motivation. My advice for the future is that if you plan to fire anyone, confine your decision to performance based factors alone."





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me