Cyber security: Trusting your source for drivers, software tools

Some of the most published cyber security events have been traced back to malicious content embedded on a trusted user's laptop through an e-mail or downloaded document. Is your process control network safe?


Its two o’clock in the morning and the control system is down. Production has stopped. An automation technician has just arrived. He is reviewing the system status as we read this post. He finds the issue in a few minutes. He knows the solution, but needs to reload the controller. Unfortunately, he finds that this new laptop does not have the right drivers. He is stuck. He goes to the manufacturer’s website to get the new drivers, but since its 2:00 a.m., the website is “under maintenance.” He feels intense pressure to get the plant up and running. He scours the web for the driver and finally finds it at a “” website. A warning pops up in his browser saying that the file might not be safe. But the shift manager is on his shoulder. So he ignores the warning and downloads the driver. He successfully loads the controller, and he is a hero for getting the plant online.

However, three weeks later there are some strange controller failures. Resetting seems to work, but every time it stops production. The accounting department is concerned that there are strange invoices that have been automatically paid. IT has reported that internet traffic is actually peaking between 4:00 a.m. and 5:00 a.m. No one even thinks how this could be related to a controller reload just weeks before.

Some of the most published cyber security events have been traced to inadvertent infection of a process control network through a trusted user’s laptop. While the above example gave clear warning that the driver might have malicious content, in many real world examples the malicious content was embedded in an emailed or downloaded picture, a PDF file, or an executable utility.

Often these infected items are found in “water holes.” These “water holes” are places professionals frequent for information and tools. I am sure you have some of your favorite websites. Those who wish to exploit you network also know these are favorite spots. Unfortunately in many cases these sites are poorly monitored or configured, and can easily be exploited to host malicious software.

We all know what to do when everything is okay, but when the plant is down do we always choose the safest path? A good system anticipates the need for drivers, backups, and tools so that they can be found from trusted sources.

So have you discussed with you contractors and technicians where they get drivers, and software tools? If not, you might find the “watering hole” to not be such a comforting place.

This post was written by Bruce Billedeaux. Bruce is a senior consultant at MAVERICK Technologies, a leading automation solutions provider offering industrial automation, strategic manufacturing, and enterprise integration services for the process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, business process optimization and more.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me