Cutting through the fog on pneumatic lubrication

Choosing the right strategy to prolong the life of key equipment will have a major impact for your plant.

06/14/2017


A standard oil-fog or direct feed lubricator delivers oil drops 2 microns or larger directly into the air stream. They are best located near the tool they are lubricating. Courtesy: IMI Precision Engineering

Click here to view the 2017 Lubrication Guide.

Pneumatic devices that push, pull, lift, position, or convey last longer and perform better when supplied with compressed air that is clean, dry, pressure-regulated, and lubricated. The service life of many air tools, cylinders, valves, air motors, and other air-driven equipment can be extended by consistent aerosol lubrication.

Why lubricate? Environmental factors like extreme temperatures and excessive moisture, along with operational factors such as start-up and operational friction, reduce the life of most working pneumatic devices. Oil aerosol delivered in compressed air reduces the effects of these factors and extends the life of pneumatic components.

How aerosol lubricators work

Aerosol lubricators automatically deliver a metered amount of oil into the air path of operating pneumatic equipment. Lubricators function by creating a pressure drop that causes oil to be siphoned into an adjustable dome. Using the dome adjustment and observing the drip rate allows an operator to set the amount oil to be delivered to downstream equipment.

Operating manuals for pneumatic equipment typically specify the amount of oil required to keep the device operating optimally. Lubricators should be adjusted to deliver the amount of oil specified at defined operating conditions and then validated after the equipment is in operation.

Oil-fog, direct to the tool

The mostly widely used type of lubricator is oil-fog, sometimes called direct feed. These lubricators deliver 100% of the oil drops seen in the dome directly into the air stream. Oil particles traveling downstream are normally 2 microns or larger. Because of gravity, these particles only will remain airborne for a distance up to about 15 feet, and they normally will not travel up or follow intricate flow paths. As a result, oil-fog lubricators should be located in-line and near the tool they are lubricating. They are very efficient at delivering the right amount of oil directly to the cylinder, valve, or tool.

It is not always possible to meet optimal conditions for oil-fog lubricators. When these conditions are not met, the oil will collect in the air line instead of travelling to the equipment. The result is reduced air flow and either inadequate or excessive tool lubrication.

Standard oil-fog lubricators are not efficient for applications where the air line has vertical air paths, multiple tool lines, or bends in the air stream that prevent larger oil particles from reaching a tool. In these situations, a micro-fog lubricator provides better lubrication results.

Micro-fog – multiple paths

With a micro-fog lubricator, the oil drip is atomized into particles smaller than 2 microns. Approximately 10% of the oil drip seen in the dome is transported into the airflow and the rest of the oil is returned to the bowl for future use. Because the particles are small, they can travel long distances, vertically, and through intricate flow paths. Because only 10% of the oil is being delivered downstream, they are good for applications that require better adjustability of small amounts of direct lubrication.

A micro-fog lubricator atomizes oil into droplets smaller than 2 microns. These can travel vertically, over long distances, or through intricate flow paths and can be used to lubricate multiple tools. Courtesy: IMI Precision EngineeringFilter-regulator-lubricator

A lubricator is almost always used together with a filter and regulator pre-conditioning the air. These can be stand-alone components or an integrated filter-regulator-lubricator. Air leaving a compressor contains water and contaminants that can cause damage and shorten the life of downstream equipment. Even pre-lubricated components can fail when contaminated air degrades the lubrication or washes it out. Allowing contaminated air into a lubricator can result in reduced oil feed.

Filtering ensures that clean dry air is sent through the lubricator and on to the operating equipment. Regulating air flow to meet conditions specified by the equipment operating manual ensures the equipment performs optimally. Aerosol lubrication is the final step after filtration and regulation. Proper lubrication protects equipment, prolongs tool life, helps control costs, and keeps processes running efficiently and productively.

Charles Werdehoff is a precision engineering and product marketing manager for IMI Norgren Filter/Regulator and Lubricant (FRL) Products.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me