Credit index: Manufacturing, service sectors showing signs of contraction

In his monthly commentary regarding a national survey of credit managers in the manufacturing and service sectors, Euler Hermes ACI Chief Economist Daniel C. North says survey data showed a decline for the third straight month in the manufacturing and service sectors.

12/03/2007


Amid fears that the nation's economy is headed for recession, a major credit index showed economic contraction in the manufacturing and service sectors for the first time in five years. According to analysis from trade credit insurer Euler Hermes ACI , a potent combination of negative economic factors could lead the Federal Reserve to once again lower interest rates in an attempt to revive the sharply slowing economy.
In his monthly commentary regarding a national survey of credit managers in the manufacturing and service sectors, Euler Hermes ACI Chief Economist Daniel C. North says the survey data showed a decline for the third straight month in the manufacturing and service sectors.
"Although the drop was relatively small, six of the 10 index components fell, leaving five components below the 50 level. This indicates economic contraction,” says North.
To explain the reason for the continually deteriorating business conditions, North continues to point to a number of negative headwinds facing the U.S. economy.
"Gasoline prices are high, housing prices are low, the dollar is crumbling, consumer confidence is plummeting, holiday sales have been mixed at best, credit is drying up, bankruptcies and foreclosures are on the rise, the employment situation is decaying, and conditions in the housing industry are getting worse,” he says. "It is a potent combination that could lead the economy into a recession in the first half of next year.”
However, North concedes that both the economy and the nation's business environment have remained resilient so far, but "cracks are starting to show, and the Fed will almost certainly cut the Fed Funds rate again at its December 11 meeting in an effort to forestall a recession.”
In all likelihood, North believes the Fed will have to continue to cut the Fed Funds rate well into 2008—perhaps as low as 3.5 percent.
North says the manufacturing sector manufacturing sector fell slightly in November, with bankruptcies plummeting 7.9 percent—the second largest drop on record. "The bright spot of the manufacturing report was that the sales component erased all of last month's 5.2-percent fall,” he says.
As has been the case for months now, comments from the survey participants were mostly about the terrible conditions in the housing market, but this month, North explains, "There are unhappy comments from other industries as well, indicating more widespread weakness.”
For example, one manufacturer of nuts, bolts, and screws, says manufacturing "is cutting back to a four-day week.” According to a petroleum refiner, "We are seeing stress across industries due to rising energy and raw material costs.” And a manufacturer of cookies and crackers notes how the housing crisis is now directly affecting even the food industry: "We're affected by the trauma of home builders, mortgage banks, and title companies.”
Meanwhile, North said the service sector decline was widespread as seven of the 10 components fell. As with the manufacturing sector, bankruptcies led the way down, falling 6.0 percent.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me