Cost savings opportunities in machine safety
Machine safety shifted in 2002 with the changes in NFPA 79 introducing safety PLCs and safety communication and control bus technology as solutions allowed for machine guarding, the beginning of a major paradigm shift in machine safety. See savings tally.
Machine safety entered an era of major paradigm shift in 2002 with the changes in NFPA 79 introducing safety PLCs and safety communication and control bus technology as solutions allowed for machine guarding. This change offered choices in safety automation the same as those choices offered in the early 1970’s when PLC’s were introduced for general automation. Now, safety automation can be an integral part of general automation by choice if the application opportunity is ripe with similar drivers as was the application opportunity for general automation.
Safety Automation drivers today can be up to:
1.) 80% reduction in typical components
2.) 40% reduction in engineering
3.) 30% reduction in check-out time
4.) 20% reduction in required floor space
5.) 5% to 15% increase in productivity
In my opinion, as you look at your current machine safety solutions and machine safety culture, you might also want to look at the above drivers where some companies have been the early adopters of safety automation and achieved these results. And, while you’re at it, also ask yourself if your machine guarding solutions would be considered “best-in–class”?
In this competitive environment don’t you need to look at metrics like sustainability, competitive analysis, profit, and the like in order to drive your business to a competitive advantage? After looking at these drivers isn’t it hard to look the other way?
Don’t you agree?
Let’s hear your ideas?
Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Cost Savings Opportunities in Machine Safety
Did you see the Safety Integration Webcast?
Contact: www.jbtitus.com for “Solutions for Machine Safety”.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey