Coriolis flowmeter has high accuracy, is certified for pharmaceutical, food, and beverage use
Siemens' Sitrans FC410 is a light and compact Coriolis flowmeter with a high measuring accuracy of 0.1% of rate. It is certified for use in the pharmaceutical as well as the food and beverage industries.
The Siemens Sitrans FC410 is a light and compact Coriolis flow meter that featuring a high measuring accuracy of 0.1% of rate. The meter is designed for integration into machine and plant construction or for frame-mounted equipment. The combination of compact design, high accuracy, with a high degree of environmental protection orients Sitrans FC410 toward use in any facility where space is very limited.
Sitrans FC410 is especially suitable for use in challenging applications where accuracy and reliability in measurements of density and mass are required. Sitrans FC410 is certified for use in the pharmaceutical as well as food and beverage industries.
Sitrans FC410 communicates with Simatic and all other common process control systems via the multidrop-addressable Modbus RTU485 and can be integrated easily into existing and new systems. Installation and commissioning of the flow meter require simple, one-time configuration in the control system. If a flowmeter is moved or further flowmeters are connected, the user settings are automatically transferred.
- See more Control Engineering process sensor and actuator products.
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.