Cooling for electrical enclosures

These cooling units for industrial electrical enclosures are offered in NEMA Type 12, NEMA Type 3R/4 and stainless steel NEMA Type 4/4X designs, with operating voltages of 115 Vac, 230 Vac or 460 Vac for a total of 18 new models.

06/30/2009


Phannenberg DTS 31x5 and DTS 32x5 cooling units
The DTS 31x5 and DTS 32x5 cooling units for industrial

electrical enclosures have been added to the DTS 3000 series with 5-7,000 and

9-12,000 Btu/h ranges. The two new designs are offered in NEMA Type 12, NEMA

Type 3R/4 and stainless steel NEMA Type 4/4X designs, with operating voltages

of 115 Vac, 230 Vac or 460 Vac for a total of 18 new models.

The 12-inch depth of the DTS 31x5 can be installed standard

into 12-inch deep NEMA enclosures. The indoor NEMA Type 12 units can be used

for a variety of industries including material handling, textile, glass,

automation and assembly. The outdoor NEMA Type 3R/4 cooling units can be used

in applications such as telecom, renewable energy (solar and wind) and outdoor

electronic applications such as electronic billboards and kiosks. The stainless

steel NEMA Type 4/4X version is ideal for all wash-down related applications

including food and beverage, pulp and paper, waste water management, packaging

and marine applications.

Pfannenberg Group

www.pfannenbergusa.com





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.