Control Engineering salary and career survey, 2013
Table: Area that gets highest emphasis vs. what should get highest emphasis
Gets emphasis Should get emphasis Areas
34% 19% Operations
21% 19% Automation and controls
13% 16% Safety
8% 8% Maintenance
3% 3% Energy
3% 3% Instrumentation
3% 13% Training, education
2% 1% Manufacturing IT
13% 18% Other
Control Engineering published a link to an online survey and received 977 responses between Dec. 4, 2012, and Jan. 11, 2013. A short article about the survey was published in the February 2013 print and digital edition, and it was mentioned in several Control Engineering e-mail newsletters. As incentive, one $100 gift card was awarded randomly to five survey respondents. Respondents were not limited to subscribers; anyone could take the survey; 977 responses were qualified based on those who said they were currently doing engineering or managing engineering functions at the field or corporate level within their companies. Responses per question varied from 106 to 2,895.
- Mark T. Hoske, content manager with Control Engineering, CFE Media, can be reached at firstname.lastname@example.org. Amanda McLeman, managing editor, conducted the survey and compiled the accompanying online report.
More respondents expect salary increases than decreases
Adequately prepared personnel are difficult to find
Continuing education and training are key to success
Technical challenges aid job satisfaction
Schedule time this month to mentor a team member with less experience and/or seek mentoring from one with more experience.
Online extra - see below
- More details, not in March 2013 print/digital edition
- Full report online has data points and extra graphics
- Concerns and advice from two write-in questions
Two open-ended questions asked for input on the biggest concern for 2013 and engineering career-related advice offered to others.
Among concerns were:
Not having enough time to finish a project correctly due to overload.
Staying technically adept
Job advancement and financial compensation
Government regulations, tax increases
Personnel to take care of heritage systems
Getting new and or continuing business from our customers.
Timeline for next expansion.
New product development
Job recognition and career advancement.
Personnel shortage and lack of support from Management on training of existing Automation workforce
Not enough people to support the large amount of growth.
Some of the advice, divided into four categories, follows.
The best additional skill to be good at engineering related jobs is project management.
Get an engineering degree and a MS in business. Try different jobs to decide what you like. Find a mentor and/or sponsor in the organization; your life will be a lot easier.
Get as much education as possible, BUT don't limit yourself to one engineering / science discipline. Make sure you have an extremely firm foundation of higher mathematics, including ALL the calculus and statistics families. Along with that, ensure a deep understanding of PHYSICS as a science, since much of engineering hinges directly on the equations of mathematics AND the Laws of Physics. For those so inclined, also be knowledgeable in things "chemistry," since it is fundamental to the building blocks of life! While I realize that is a tall order for a modern technologist, the state of advancement of technology is such that to be truly successful a person MUST possess these aptitudes.
Never stop learning! Make use of the tremendous resources available online and through trade publications.
Continue to stay current on new technology.
Diversify. And learn as much as you can.
Lean manufacturing requires you to wear many hats, make sure you keep focused on the overall priorities of the operation.
Find someplace that you can engage with your colleagues and enjoy going to work each day because you spend a large portion of your life at work. Negotiate fair salary and benefits because no one will offer more than they must.
Concentrate on activities that make your boss's job easier.
Keep trained in your skill work hard early make a name for yourself and don't get associated with bad people and programs
Get as many different experiences as you can and make sure you contextualize the effect on your competencies and capabilities.
Know what you're talking about before you open your mouth.
Look for jobs that give you the opportunity to hone skills that are useful with outside companies as well as your own.
Don't believe anything including your schooling, nothing is stead fast. Always approach with an open mind, no matter how simple or dumb it looks from the outside, keep an open mind before dismissing.
Find something you love to do and you will do it well.
Never lose sight of your common sense. If something doesn't ring true it probably isn't!
Make sure you like what you're doing, otherwise going to work will be an unwanted chore that will only receive a portion of your potential. Happy employees = productive employees.
Patience. Advancement is based on knowledge and experience and not time.
Stay curious, always question how / why.
If you're already employed in an engineering profession, develop leadership and communication and ability to work with a diverse group of people (interpersonal skills).
Prepare yourself with presentation and communication skills.
Learn everything you can about relationships, TRUE listening, and communication. It will greatly help you not only in your career but your entire life.
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.