Comparing the Major Manufacturing Improvement Methods — Part 1

EDITOR'S NOTE: The past decade has seen the development of a number of manufacturing management concepts. Chief among them are: lean manufacturing, six sigma, supply chain management, total productive maintenance (TPM), and reliability centered maintenance (RCM). While these names are well known, they are not well understood.


In recent years, lean manufacturing has come to the forefront as a model for manufacturing excellence. Unfortunately, the model was not, at least until recently, documented as to the details of the methodology.

The book, The Machine that Changed the World , by James Womac et al, was an interesting discussion of the history of what came to be known as lean manufacturing, but it was scant on the details of the methods for achieving it. More recently, in Running Today's Factory , Charles Standard and Dale Davis have provided a clear methodology that integrates lean manufacturing concepts and factory physics in a very practical way. Their points of emphasis are: reducing process variability; reducing system cycle times; and above all, eliminating waste in the manufacturing process and supply chain, from receipt of order to delivery of product and payment.

Unfortunately, the behavior of many managers, and the performance of many manufacturing plants, suggest that Standard and Davis' book has not been widely read or practiced. The same could also be said for many other good books on manufacturing, management, and leadership. These books include works by Deming, Nakajima, Pande, Belasco, Senge, Wheatley, Hamel, Stewart, Moore, and others. And they cover a range of topics and methods, including six sigma, supply chain management, reliability centered maintenance, total productive maintenance, leadership, systems thinking, intellectual capital, complex adaptive systems, reliability, and so on.

Head count confusion

One of the major issues that needs to be addressed is the understanding (or lack thereof) that lean manufacturing is not about head count reduction. Lower head count per unit of output is a consequence of applying lean principles. Yet it seems that many managers — even at very high levels — still believe that reducing head count will result in a lean company. But there is a huge body of evidence that indicates the contrary is true.

A full understanding of lean principles is essential. An analogy that may help is to recognize that "lean" and "fit" are two very different concepts. Olympic athletes are "fit," which typically gives them a "lean" appearance. Anorexic people are "lean," but hardly "fit." And we certainly don't want an anorexic company. So, lean manufacturing is about the concept of being lean through being fit, not the other way around.

Finally, recall W. Edward Deming's famous observation: "Your system is perfectly designed to give you the results that you get." A corollary to Deming's statement would be: If you reduce the resources available to your system without changing its basic design, then system performance will decline.

The data from studies of companies that have engaged in head count reduction support this corollary. For example, in a front-page article of The Wall Street Journal (7/5/95), it was reported that for several hundred companies that engaged in cost cutting through layoffs or downsizing over a period of about five years:

  • Only about 50% showed productivity improvement

  • Only about 33% showed profit improvement

  • Some 88% experienced a serious decline in morale.

    • Similar research conducted by The Conference Board, and reported in 1996, showed that for companies using a downsizing strategy:

      • 30% actually experienced increased costs

      • 22% terminated the wrong people

      • 80% reported a collapse in morale

      • 67% showed no immediate productivity rise

      • 50% showed no short-term increase in profits.

        • The Conference Board also pointed to another concern: the loss (or delay) of technology that results from the inevitable cutbacks in research and development staff during tough times. They found that six months after a layoff, there was an increase in share price relative to market indices, but that after three years, share prices had declined relative to market indices.

          Saving for profit

          More recently, Gary Hamel reported on the concept of "corporate liposuction" ( Business Week , 7/17/00). He describes this as a condition in which earnings growth is more than five times sales growth, generally achieved through cost-cutting.

          In a review of 50 companies engaged in this "corporate liposuction" approach, 43 suffered a significant downturn in earnings after three years. These companies were notable members of the Fortune 500, such as Kodak, Hersheys, Unisys, and others. Hamel points out that growing profits through cost cutting is not likely to be sustainable and must be balanced with sales growth through innovation, new-product development, process improvement, etc. Other researchers, including Deloitte & Touche and the American Management Association, have reported similar findings.

          This is not to say that cost cutting never applies. Not all the companies studied suffered as a result of their cost cutting. It may apply, for example, if:

          • A company is on the verge of collapse and has no choice for survival

          • There is a bloated bureaucracy and cutbacks are necessary to assure longer term success

          • Employees or unions are intransigent, and there is no other way to get people's attention about the seriousness of improving productivity

          • There are obvious situations of waste, redundant functions (perhaps the result of a merger), etc.

            • In general, however, cost cutting is a low-probability strategy (if one can call it a strategy) for success.

              So why do senior managers persist? Perhaps they're overconfident in believing they can beat the odds. Perhaps because it's easy, it sometimes works, and it doesn't require a lot of leadership skill. Anyone can cut costs by 5% and simply expect the job to be done for 5% less.

              Perhaps they think they can pressure people into being creative about their jobs and eliminating waste — and sometimes they can. Unfortunately, however, the data suggest strongly that, as in Las Vegas, the odds are inherently against these senior managers. And the reasons are built into the systems already established in the company. This condition suggests, in turn, that changing the business system design is a better strategy.

              So, which methodology should be used for improving the business system design? Next month's "Management Side of Engineering" column will begin a review of several currently popular methods, all of which are quite good.

              However, a key to the application of all these methods is leadership. Management must provide clear direction as to the strategy, the tools, and the goals and must assure organizational alignment around a common strategy. Otherwise, these tools will produce less than optimal results. In fact, they could be counterproductive. For this reason, the final column in this series will review some leadership principles, too.

              <table ID = 'id3001750-0-table' CELLSPACING = '0' CELLPADDING = '2' WIDTH = '100%' BORDER = '0'><tbody ID = 'id3008406-0-tbody'><tr ID = 'id3001629-0-tr'><td ID = 'id3002833-0-td' CLASS = 'table' STYLE = 'background-color: #EEEEEE'>Author Information</td></tr><tr ID = 'id3001863-2-tr'><td ID = 'id3001865-2-td' CLASS = 'table'>Ron Moore is Managing Partner of The RM Group, Inc. in Knoxville, TN, and is author of the book Making Common Sense Common Practice: Models for Manufacturing Excellence. He can be reached at 865-675-7647 or by e-mail at . In the UK he is affiliated with Reliable Manufacturing Associates, who can be reached at Tel: 01925-601-074 or by e-mail at . In Australia he is affiliated with SIRF Roundtables, Ltd., who can be reached at Tel: 03-9248-1380 or by e-mail at .</td></tr></tbody></table>

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me