Commercial segment set to lead solar energy storage market by 2017

The commercial solar energy market is set to rise to 2.3 GW by 2017 thanks to an increased desire to intelligently manage the use of PV energy in an attempt to reduce electricity cost.

09/27/2013


Currently the smallest part of the global solar energy storage business, the commercial sector is projected to expand by a factor of 700 in the coming years and become the largest market segment in 2017. 

Global installations of photovoltaic (PV) storage systems for commercial use are set to rise to 2.3 gigawatts (GW) in 2017, up from a mere 3.2 megawatts (MW) in 2012, according to a new report entitled “The Role of Energy Storage in the PV Industry” from IHS Inc. (NYSE: IHS), a leading global source of critical information and insight. This will increase the commercial segment’s share of PV installations to 40% in 2017, up from 5% in 2012, as presented in the attached figure. 

The commercial solar energy market is set to rise to 2.3 GW by 2017 thanks to an increased desire to intelligently manage the use of PV energy in an attempt to reduce electricity cost. Courtesy: IHS

“Just last year, commercial was the smallest market for PV storage systems, far behind the residential and utility-scale segments,” said Abigail Ward, PV analyst at IHS. “However, facing rising energy prices and the growing need for backup power supplies, commercial enterprises are turning to PV storage solutions that work in concert with their solar-power systems. This will allow commercial to surge past residential and utility to become the largest market for PV storage in just four years.”

The commercial solar market consists of PV systems installed in businesses, including factories, offices, and other enterprises. 

Electricity rates drive demand

The major reason a commercial enterprise installs an energy storage solution is the desire to intelligently manage the use of PV energy to reduce electricity cost. 

“Utilities increasingly are imposing both peak demand charges and time-of-use fees on their commercial customers,” Ward noted. “These costs can be minimized by using a PV energy storage solution.”

An energy storage solution can be used to shift PV energy from when it is generated for on-site use during periods when these charges apply. 

“As a result, the amount of energy imported from the electricity grid during these times is reduced, and customers can attain huge savings on their electricity bills,” Ward observed. “These demand charges are being introduced to relieve pressure on limited electricity grids during times of high energy demand.” 

The backup plan

PV energy storage in commercial applications also can provide back-up power in regions where there are weak and unreliable grids. Electrical blackouts can have a tremendous impact on commercial operations, and often can result in significant financial losses. Rather than exporting PV energy to the electricity grid when generation exceeds on-site demand, the energy can be stored to be consumed during times when the electricity grid has failed, avoiding any disruptions. 

North America to take charge

Concerns about energy rates and grid reliability are prevalent in the North American commercial market. Consequently, North America is expected to lead the world in commercial PV storage, accounting for more than 40% of installations in 2017.

Storage in these applications will also be encouraged by the California Self-Generation Incentive Program (SGIP), which provides a financial subsidy against the upfront cost of an advanced energy storage system.  Installations likewise will be boosted by California Energy Storage Bill AB 2514, which includes targets for investor-owned utilities to procure by 2020 a given amount of energy storage in its electricity network, including individual targets for the customer markets.

Another lucrative region for commercial PV energy storage is Japan, where electrical blackouts are common following the Fukushima nuclear disaster. Also on a fast growth track is Germany, where self-consumption of PV energy is becoming increasingly financially attractive.

Supply-side constraints

The size of the commercial PV energy storage segment now is limited by the small number of suppliers and products serving the segment.

“At present, many of the suppliers active in the PV storage business are targeting the residential PV market, where systems are largely being installed to increase the on-site self-consumption of a PV system owner,” Ward said. “However, installations in the commercial PV sector potentially can reach the point of payback much more quickly than those in the residential area. This will encourage many PV storage suppliers to enter the business in the coming years.”



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me