Coal mine safety

Dear Control Engineering: Aren’t there sensors and other safety devices that could make coal mining less hazardous?

06/23/2010


Dear Control Engineering: Aren’t there sensors and other safety devices that could make coal mining less hazardous?

While 2010 has been a difficult year with 27 mine-related fatalities so far, coal mining is not nearly as hazardous an occupation as it used to be. Prior to 1930, people were practically a consumable item with 2,000 and more fatalities a year. Once we got through WWII, deaths continued a downward trend and by 1950 they were typically below 500, and half that by 1970. Still, mines continue to be dangerous places, and it is difficult to imagine the turmoil people around Montcoal, WV, are experiencing as they await news of who may have perished below the ground.

Methane is frequently trapped in coal seams, and coal dust is highly explosive if airborne, so there are many potentially life-threatening elements. Technologies to measure these problems are common. There are devices to monitor oxygen, carbon dioxide, carbon monoxide, and methane. There are personnel locating devices that use GPS technology to indicate who is where. Some mines tie sensors together using Ethernet, just like any other potentially dangerous process manufacturing environment.

The problem is that such technologies have to be deployed and used properly. One report from the current Upper Big Branch mine rescue says that the mine owner had not put the equipment in the part of the mine that suffered the explosion. This is in spite of a 2006 federal law requiring its use. Miners have been known to bend safety rules to increase production. Regulations require that mines must be evacuated if methane concentrations exceed 1%. (It becomes explosive with concentrations as low as 5% and is especially dangerous around 9 to 10%.) Heavy equipment is supposed to shut down automatically if it reaches 1.5%, but such regulations have been ignored to maintain production levels. Coal dust can be even more explosive, but equipment usually uses water sprays to capture it.

As is often the case with industrial disasters, the main issues don’t relate to a lack of relevant technology as much as the way technology is (or isn’t) used, and how well people are trained. The mine owner in this case, Massey Energy, has been criticized for its record on safety operations. Such was also the case brought against BP in the Texas City refinery explosion in 2005. After the dust settles in West Virginia, there will be much to sift through.

Posted by Ask Control Engineering on April 10, 2010



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me