CNC trainer shows how machine shops can use texting alerts

While large companies have been using technologies that can call, text or e-mail machine shop owners with alarm alerts technology for a few years now, systems are now available for small machine shops that run unattended cycles over the weekend and on holidays. Randy Pearson, a longtime veteran of the machine tool industry, and currently a Siemens sales support manager who trains users on CNC m...

02/01/2010


CNC trainer shows how machine shops can use texting alerts

While large companies have been using technologies that can call, text or e-mail machine shop owners with alarm alerts technology for a few years now, systems are now available for small machine shops that run unattended cycles over the weekend and on holidays.

Randy Pearson, a longtime veteran of the machine tool industry, and currently a Siemens sales support manager who trains users on CNC machine tools, has recently begun teaching small to mid-sized companies how to use texting alerts for unattended operations.

“In the past, when you would setup your machines for unattended operations,” says Pearson, “you often had the following scenario: Load the bar feeder, set the program, go home and pray nothing goes wrong. About 15 years ago, some machine tool and fabricating equipment companies began to have call centers to flag you on an alarm, but those systems were often hit-or-miss, depending on the quality of the personnel and the chances of reaching you at your designated phone number. Entire weekends might have meant lost production due to a single tool break, bar jam, low lube or coolant level, air compressor stall, spindle speed slowdown or just a power spike.”

With the the @Event software in the Siemens Sinumerik 840D CNC (which is called the Easy Message feature on the new Siemens 828D CNC), machine shop owners and operators can get alarm alerts by phone, fax, e-mail or mobile phone via a call or SMS text message. “A message telling you what alarm has tripped comes to you automatically, because the software is encrypted right on the CNC,” Pearson says.

Using this technology changes the procedure for unattended CNC operations. According to Pearson, the new procedure is: “You load the bar feeder and setup the machine for a pre-determined alarm tag or sequence of alarms, since the machine can now periodically alert you to various parameter checks. Then, you set the program and go home. Since the alarm is set off the fault code on the machine, there's no human intervention whatsoever, and the messages are completely automated.”

“These systems keep your productivity in motion, all weekend or anytime you can reasonably run unattended. For shops where you have more machines than operators, this can be an instant journey into the world of remote alarm sequencing, formerly the realm of only the biggest shops and captive production departments in automotive, aerospace and other dedicated production operations.”

Pearson adds that most popular CNC brands currently have some type of e-mail client server such as Outlook Express, but he considers the Easy Message and @Event systems to be the next step up, because the software is fully automated to send messages to selectable locations in different modes for an array of messages. The e-mail or text message, for example, can contain one or more alarm messages, with details provided as attachments. One e-mail or text can be set for each alarm or sent periodically with all the alarm messages.

 





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.