Closed current switch series have low fixed trip point
The CR9400 Series and CR9480 Series of Normally Closed Current Switches by CR Magnetics have a low fixed trip point and are fully isolated and self-powered.
CR Magnetics' CR9400 Series and CR9480 Series of Normally Closed Current Switches are designed for applications that require an on-off indication of current flow. The key features include a low fixed trip point as well as being fully isolated and self-powered. These feature allow for lower losses, improved lifetime durability, increased ruggedness and heat capacity.
The CR Magnetics CR9400 Series Current Switches are a closed design while the CR9480 Series are Split Core Current Switches. They are available with a NPN or PNP output transistor for DC switching and ACA output for switching AC. Continuous operating current above the rated full ON level of 350 mA is required.
- See more Control Engineering sensor products.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.