Clean room cables for semiconductor industry applications
Cicoil's Flexx-Sil rubber jacketed clean room cables are designed for semiconductor industry applications and have a computer-controlled extrusion process that lets the cables be placed in a flat parallel profile.
Cicoil's Flexx-Sil rubber jacketed clean room cables are designed for semiconductor industry applications. The Flexx-Sil rubber jacketed cables meet the Air Cleanliness Requirements of ISO 146441, exceed the outgassing requirements of ASTM E595 and are useful in vacuum environments as well.
Cicoil's computer-controlled extrusion process allows each individual power conductor, signal pair pairs, tubing or multi-wire bundles to be placed in a flat parallel profile, precisely controlling the spacing of each individual component, insulation thickness and the overall cable shape. The Cicoil Flat Cable Solution ensures that each of the inner components do not rub against each other, wear or deform during operation and don't move within the Flexx-Sil material that forms the outer jacket.
Cicoil's Flexx-Sil extruded cables are designed to be impervious to continuous motion, tight routing, vibration, UV light, steam, pressure washing, de-ionized water, alcohol, autoclave, mechanical stress, expanded temperatures (-65 C to +165 C) and many chemicals.
- Edited by CFE Media. See more Control Engineering energy and power products.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.