Choosing output formats for instrumentation transmitters
Why isn’t it easier to offer user selectability of signal format for field devices?
Dear Control Engineering: The article about new gas flowmeters says that the company is using a more modular transmitter that makes it easier for the user to select a signal format. Why aren’t more companies doing that? Having to change field devices is a major drag on trying to use a more sophisticated networking technology.
One of the more interesting aspects of the flowmeters that FCI has introduced is the modularity of its transmitter. While most devices are hard wired to one specific format (e.g., 4-20 mA with HART or Foundation fieldbus), these new devices offer a plug-in module to allow users to change the output format.
I don’t know if this is the first time somebody has done this, but it certainly is not a common feature. Typically a transmitter is indeed fixed to a given protocol. This fact has made the process of migrating to a more sophisticated networking protocol much more expensive. For example, if all the devices in a process unit use 4-20 mA or some older analog voltage signal, you’ll probably have to replace them all if you want to move to a fieldbus. FCI has promised that its new transmitter is future proof in the sense that if you do need to make such a change, you can change the module (assuming the right format is available) and not the whole device. The company plans on using this approach with larger portions of its product line as time goes on.
To my thinking, a typical flowmeter or pressure sensor ought to come with a universal transmitter that is software configurable or you set a group of DIP switches to give the connectivity you want. Set it yourself for anything from 4-20 mA, Modbus, USB, Profibus, Foundation fieldbus, or any number of industrial Ethernet flavors. Maybe we’ll even throw in wireless. That isn’t quite practical yet, but I doubt it is far away. Some protocols still depend on a dedicated ASIC which is probably why having a plug-in component is still a requirement. My approach is probably still much too expensive, but might be here sooner than you think.
Subscribe to our Process Instrumentation & Sensors eNewsletter.
Peter Welander, email@example.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.